- blower only ET reductions, whipple, radix, ati.......
- ATI Procharger??
- WHERE TO BUY MANLEY RODS?
- 1/4 times
- estimates of 6.0 swap cost????
- 100 mile update after Z06 maf install, even more fuel trim?
- anyone with a rear sway bar NBS?
- New best for me!
- Test driving a new SS Silverado in 2 hours.
- installed nx nitrous kit
- Rich or Lean: Procharger tuning
- FLAT TOP? OR DISHED PISTONS?
- Vr volecity stack results.
- 5.3 bolt-ons? tell me.
- my own ss truck
- true dual???
- ATTN: NEIL!! - - WALL!!! - -
- VR Velocity Stack Verdict?
- transmission temp
- Could this work-cam, light headwork, & Kenne Bell blower?
- COT and LTFT questions
- Probably a stupid ? but...
- Fuel system limits.
- Anyone ever dyno their 4.8's ??? (Stock or Not)
- silly to put a cutout on a duramax?
- Hey BADHD, did ya get your plugs changed?
- Dyno a Z71?
- TRANS COOLER
- Does the PCM do anything for low fuel?
- How many have true duals on there 6.0L's
- What is the bore and stroke #'s on a stock 6.0?
- I need some info on my truck......
- smaller pulley for the radix blower???
- Gasoline Turbo guys ?????
- all with stock ext cabs
- Denso Spark Plugs
- EGR valve.....
- NGK part number
- 2004 performance
- 4X4 guys, how are you launcing?
- Trans Temp Gauge Hole
- HEMI KILL
- Anybody need a 8.1L radiator?
- compression test #'s
- Manley or crower connecting rods?
- 4wd truck guys what transmission?
- Thinking about a different converter when I build my tranny,
- 2003 silverado
- Help, torque spec for pinion yoke, how tight should this be?
- Tuning...with LS6 cam?
- x-pipe
- Fuel guage
- Magna Charger receives E.O.for the Radix!
- Got my descreened Z06 maf, now fuel trim ?? again!
- Nos
- Unlimited LS1 Edit
- got my new mufflers!
- ASP pulley arrived chipped should I install?
- Borla ProXS. How do they sound?
- TB SPACER HELP
- engine swap
- Vaccum source?
- Fel-Pro 1041 head gaskets
- truck won't start...
- Paging Farmtruc, pinion yoke blown driveshaft replacement? *DELETED*
- Hi-Flow Cats
- Nitrous problems
- FREE MODS FOR 2002 V-6?
- CHANGING REAR ROTORS HELP!
- what to shift at w/ whipple?
- Where to buy a Driveshaft/Drivesahft Safety loop?
- Coolant hole apdater for Auto Meter gauge
- 1/8 mile times to 1/4 mile times
- Cal Tracks
- Paging Slowverado
- Combination Motorsports
- Low budget N/A 6.0 build
- B&B or Corsa
- Anyone yank the AC belt off to run the track?
- Has anyone ran a 4.8 stock reg cab at a strip?
- Dual alternator
- To those with wideband o2's:
- Are escalades quik?
- Got a 4.8L, What can I do to get some more HP?
- LS1 swap?
- 2003 duramax w/ Edge Hot Juice Box dyno
- asp pullies ordered!!!!!!
- Granatelli Mass Air Flow Sensor?
- LT headers for the trucks
- 2004 Duramax Hypertech Programmers In Stock
- egr block-off plate part #?
- Added HPP3 to L31/5.7
- Small Oil Filter On 03's
- Ride Control? "FIRM"?
- Time For New Pads???
- 2500HD cam Swap...
- 4wd vibration @45mph
- 2500, HD, hoods, drive train, questions
- Cleaning MAF
- Descreened MAF
- UPD?
- New 4.8L Sierra reg. cab Pu???
- Personal Pic
- Help with body control moduel please.
- Tow Rig gets a new best!
- Anyone ever heard of a coolcharger supercharger?
- Plugs.........
- Is it time for new o2's?????
- Underhood heat removal.....
- pcv ?
- Got a deal on a UPD intake!
- Why couldn't you "belt-drive" a turbocharger ??
- Clean up TB
- Turbo truck update.
- Hey RPM-24??
- SHIT!! I MAY HAVE A BIG PROBLEM!!
- Anyone run these Magnaflows?
- What do freeze plugs look like?
- TSP '03 Duramax: 416.9 RWHP & 747.8 RWTQ
- HEY GUYS
- Kinda bummmed, what are my options?
- Mods Update!!!!
- QTP electrice cutouts
- M'kay 3/4 ton radiator is in
- How much are we talkin??
- Alt making a slight whine?
- Comp cams 212/218 cam any good?
- Okay got my 130A alt in...
- Help w/ Installed Valve Stem Ht. ?
- Official wheel weight post.
- Need Complete Info On 4.8
- VaraRam Velocity Stack vs. Ported & Polished Throttle body?
- welp added a duramax/alison combo - am i getting greedy? LOL
- New Cam and heads For a SS
- 4.8 shifter swap
- talk about stroken each other off ,look at the Dodge boys
- What octane gas do yall use in your trucks?
- Absolute 6.0l Blower heads arrived flow numbers inside
- LS1 conversion
- #317 6.0 heads for sale!
- ATI Procharger
- Pics of drive shaft after it was broken
- want to remove my HP sucker
- 130A HD/HO alt belt length?
- My dual electric fan set up.
- ? for Fast4.8
- How much should i sell my 6.0 heads for?
- Ordered a Westers
- f body crank different than truck?
- PERFORMANCE TIRES???
- Which wire to tap for A/F ratio gauge? HELP????
- 6.0 CI Head Flow Numbers
- LS1 intake on 5.3L
- Hard starts on my 2001 5.3L Tahoe
- towing questions
- lowering 2/4 questions
- Muffler
- FIPK for 4.8 chevy
- Good driveshaft info
- Weird SES Light Problem
- Blew My Driveshaft up at 80! Long Post. Pics now up!
- Considering a DiaboloSport Predator? Read this first!!
- New Track Times
- New track times with 11 pound pulley. SLOWER!!!
- Traction Problems
- Eaton Posi for 14 bolt 10.5"
- Just for those that said it was not so........
- spring change ?
- Swaybars
- My Truck Newby
- Who's got LS1 fans and the VSC?
- HP Guestimate needed from LS1 Gurus and an intro!
- awesome i can break dual valve springs.
- new best times with westers.
- meziere wp on 5.3 truck?
- VaraRam Velocity Stack
- LS1Edit Gurus, help with shifts!
- Stage 8 locking header bolts
- rocker torq specs and crank bolt probs.
- OEM descreend Z06 maf? Anyone using one?
- paging: ranwalk
- Paging 1BADHD
- Well, I think I did it. Predator shifts & no Predator tuning
- ABS and Brake related question.
- Question for 4x4 guys
- Predator fuel trim short term numbers, what gives?!
- Muffler Replacement
- 2500HD Air Induction?
- pipe diameter????
- Oil change interval ??
- 11 pound pulley results
- Hot Rod Magazine Test Truck Video
- Installed TBS!
- Need some help w/ H&C + procharger plans
- Those with electric fans, got a ? for ya.
- New product - VR Velocity stack
- Interested in Yank - what else do I need?
- Anyone have a wiring Schematic for dual electic fans?
- How hard is it to tune these trucks??
- Wideband Monitor GP
- Vortech 6.0 info from Truck Trend
- Well I think I found my new block
- 5.3 Engine Setup for BLOWER?
- new version 1.3 LS1edit?
- Which connecting rods for 6.0? Eagle, crower?or....
- Is roots style that much better than centrifugal
- 11 lb pulley on! Last minute ??
- oil pump question
- What knd of HP and TQ can I expect to have???
- Considering buying a Diesel truck. Stick or Auto for drag?
- 2001Suburban 2500 charging problem.
- Where to put fuel pressure guage sending unit??
- Question for Pewter03GMC
- ASP Pulley Belt Question
- Any reason not to buy the Radix supercharger for my 5.3?
- LS6 INTAKE
- Hoods
- duramax
- Check this out - Wheel Fitment Tool
- question for bmBulter
- ALL WHEEL DRIVE
- Are throttle body spacers, worth it?
- Service engine light?
- Anyone want to "Yank" their converter?
- '02 8.1 engines and oil consumption
- MPG increase?
- Initial Mods for Towing?
- Sept. 19 - dyno-tuning at Futral - few ?s for LS1 Edit users
- rearend question
- Radix and Nitrous?
- Perfect exhaust setup...
- 2004 Vortech 5.3 specs
- diablo predator to tune cam?tr 220 553 114 tuning?
- My personal experience with Predator tuing vs. Westers tunin
- recommendations for cheap PCM programming
- ls1 Edit Timing Tables
- anyone ever run a stock muffler with no cats?
- May have found me an engine 6.0(LQ4)
- 1/4 times if they make an 04 RC SS 6.0L?
- LS1 and Whipple...how hard to do this??
- i finially getting the wideband theory!
- 2002 6.0
- websites with 4.3 performance?
- 2004 Chevy Colorado?
- New LQ4 6.0 cost $3768.00 !!!!
- where to get smaller pully?
- Eaton Posi??
- has anyone dyno'd a Corsa exhaust on a 5.3L engine?
- How do you raise the idle ??
- how much boost is safe?