I won't lie... I never heard of chicken fried chicken or a chicken biscuit until I moved to SC for school...

but there's nothing like a bojangles chicken biscuit, it truly woulda been a tragedy to go thru my whole life never having experienced one...

 

Maybe not in this part, but have you ever heard of the Davis Mountains? lol, yes, mountains in Texas...

 

A few years ago I managed an off site office for Exxon in a small East Texas town. I had about 30 guys I was looking after and had a big dry erase board on the wall that I would sometime put random questions up......and the first person to bring me the correct answer I'd buy them lunch that week. The best one I ever posted was......

What is the difference between Fried Chicken and Chicken Fried Chicken?

 

After 3 pages of non sense...

What's the latest and greatest with your set up?
Is the new tank working like you planed?
Have you had the new set up on a dyno yet?
How much boost are you making with the Whipple set up?

 

Its still there...havent tried the nitrous yet...really havent driven it much at all since the new pulley. I think it hit 14psi with it though. Kinda sad really, just havent had time :/

I still need to finish the wiring on the nitrous stuff before I forget where everything goes.

 

Sad indeed...

Your slipping...

 

It took my wife awhile to figured out the difference. Then again she is from Colorado....

 

I'd say 14psi is pretty good with the cubes and heads you have. I'm really curious to how that plate is going perform. Im sure I'll need one to get some extra go out of mine to keep up with the guys over on HSVracing.

 

So there is a test and tune night on Friday at a track nearby and I got rid of the other truck I was working on here (probably 30 hours in the last week alone after work) so I want to actually make some progress on mine and figured Friday would be a good goal. I started on finishing the wiring last night and its been so long since I put the nitrous harness together I forgot what all the wires were so I had to pull it apart

I need to hook up my meth pressure transducer to the AC pressure, put the intercooler pump on a switch (because, why not?), hook up the throttle position signal wire to the nitrous controller, wire in the relays for the solenoids, wire in fuel pressure safety switch, and something else I am forgetting.

Obviously needs testing and such because I think I have the 50 shot nitrous pill in there, and I am using my methanol pump as the fuel so this should be interesting...

 

14psi and a 50 shot should run pretty hard!

I'm excited to see the results.