PerformanceTrucks.net Forums
1-2-3-4/3-5-R drum, emptied...
1-2-3-4/3-5-R drum, emptied...
0 2016/07/08 16:19:57
Damage to the outer splines of the 4-5-6 hub...part of the reason i replaced it aside from the snap ring and dampener having blown out of them...
Damage to the outer splines of the 4-5-6 hub...part of the reason i replaced it aside from the snap ring and dampener having blown out of them...
0 2016/07/08 16:20:08
0 2016/07/08 16:20:29
1-2-3-4 piston
1-2-3-4 piston
1 2016/07/08 16:20:43
Stack of steels, retaining ring and snap rings waiting to be introduced to the parts washer.... Some of the steels i was able to reuse, mostly out of the 1-2-3-4/3-5-R drum(not the original one but the one i had)
Stack of steels, retaining ring and snap rings waiting to be introduced to the parts washer.... Some of the steels i was able to reuse, mostly out of the 1-2-3-4/3-5-R drum(not the original one but the one i had)
0 2016/07/08 16:20:55
All cleaned up and purty!!!
All cleaned up and purty!!!
0 2016/07/08 16:21:03
0 2016/07/08 16:21:15
Cleaned up hard oarts waiting to be reassembled...
Cleaned up hard oarts waiting to be reassembled...
0 2016/07/08 16:21:28
0 2016/07/12 17:38:58
At least i have an extra set of bushings now....
At least i have an extra set of bushings now....
0 2016/07/12 17:39:24
Exactly the damn same as the last set.....
Exactly the damn same as the last set.....
0 2016/07/12 17:39:34
Extra rear brackets....
Extra rear brackets....
0 2016/07/12 17:39:37
2-6 clutch stacked, after new piston being installed and having wait for about a week for the wrong 2-6 clutch pack to show up, only to find out we had them on the shelf the whole damn time:sigh:
2-6 clutch stacked, after new piston being installed and having wait for about a week for the wrong 2-6 clutch pack to show up, only to find out we had them on the shelf the whole damn time:sigh:
0 2016/07/12 17:45:24
Low reverse/sprag assembly installed
Low reverse/sprag assembly installed
0 2016/07/12 17:45:32
center support installed....
center support installed....
0 2016/07/12 17:45:39
Hell's fury of a snap ring,, would not want to see what would happen of one of these came loose under tension
Hell's fury of a snap ring,, would not want to see what would happen of one of these came loose under tension
0 2016/07/12 17:45:47
1-2-3-4 and 3-5-R and 4-5-6 hubs installed...
1-2-3-4 and 3-5-R and 4-5-6 hubs installed...
0 2016/07/12 17:45:54
1-2-3-4/3-5-R drum full of clutches, replaced 2 of the 3-5-r steels and 1 of the 1-2-3-4 steels... Rest looked really good....
1-2-3-4/3-5-R drum full of clutches, replaced 2 of the 3-5-r steels and 1 of the 1-2-3-4 steels... Rest looked really good....
0 2016/07/13 17:24:12
Pump centered and torqued....
Pump centered and torqued....
0 2016/07/13 17:24:17
Air checked 1-2-3-4/3-5-r clutches
Air checked 1-2-3-4/3-5-r clutches
0 2016/07/13 17:24:22
1-2-3-4/3-5-r drum isntalled until friday when i have the rings (which if you look close enough arent there!!!!)
1-2-3-4/3-5-r drum isntalled until friday when i have the rings (which if you look close enough arent there!!!!)
0 2016/07/13 17:24:28
Torque converterhousing /pump assembly in place temporary like....
Torque converterhousing /pump assembly in place temporary like....
0 2016/07/13 17:24:31
Tcm removed.....
Tcm removed.....
0 2016/07/13 17:24:37
No busted membranes, all the resistors look good, womt be able to test it until either i have another vehicle i can program it to to test it or get everything together with my truck, going to do some research and see if theres a resisitance test i can do in mean time....
No busted membranes, all the resistors look good, womt be able to test it until either i have another vehicle i can program it to to test it or get everything together with my truck, going to do some research and see if theres a resisitance test i can do in mean time....
3 2016/07/13 17:24:42
0 2016/07/13 17:24:45
And my favorite valve body to work on, and no stuck valves, denating on whether i want to use the later model upper i have that actually had a sticking valve.... Probably stay with what ive got....
And my favorite valve body to work on, and no stuck valves, denating on whether i want to use the later model upper i have that actually had a sticking valve.... Probably stay with what ive got....
0 2016/07/13 17:24:51
Tailshaft bolted on
Tailshaft bolted on
0 2016/07/15 17:09:20
Ready for valve body....
Ready for valve body....
0 2016/07/15 17:09:27
Torque converter housing torqued and cnverter seal installed....
Torque converter housing torqued and cnverter seal installed....
0 2016/07/15 17:09:33
Freshly machined l92 block......
Freshly machined l92 block......
0 2016/07/15 17:16:54
Heads and crank....
Heads and crank....
0 2016/07/15 17:17:00
0 2016/07/16 16:08:15
Thsi is where the brackets hit the frame... The raer bolt and the bolt on the side of the frame werent bad, its the front ones that were a pain especially the driver side, ended up dropping the evap canister to gain access to the hole in the frame.... I hit the frame with rubberized undercoating before i bolted the bracket down, i can make anything run...
Thsi is where the brackets hit the frame... The raer bolt and the bolt on the side of the frame werent bad, its the front ones that were a pain especially the driver side, ended up dropping the evap canister to gain access to the hole in the frame.... I hit the frame with rubberized undercoating before i bolted the bracket down, i can make anything run...
0 2016/07/16 16:42:28
Thought i had better pics of the hole in the frame in relation to where the brackets mounted and the evap canister dropped out of the way...guess not
Thought i had better pics of the hole in the frame in relation to where the brackets mounted and the evap canister dropped out of the way...guess not
0 2016/07/16 16:42:31
0 2016/07/16 16:42:34
0 2016/07/16 16:42:37
Everything bolted down and torqued, including the shock i had lost the nut for when i installed the addaleafs....
Everything bolted down and torqued, including the shock i had lost the nut for when i installed the addaleafs....
0 2016/07/16 16:42:40
0 2016/07/16 16:42:43
0 2016/07/16 16:42:46
0 2016/07/16 16:42:48