PerformanceTrucks.net Forums
Starting her out right.... Lol!!!
Starting her out right.... Lol!!!
0 2016/07/17 11:14:37
0 2016/07/17 11:14:44
99-06 nbs gen 3 style pcm
99-06 nbs gen 3 style pcm
0 2016/07/24 15:48:54
07up gen iv nnbs e38 style pcm
07up gen iv nnbs e38 style pcm
0 2016/07/24 15:49:00
Old cover coming off....
Old cover coming off....
0 2016/07/24 15:52:28
Really happy to see the lack of metal and awesome gear pattern.... I will be leaving the rear end alone.... Been over ten years since i rebuild the rear end.... Sadly this is the first fluid change and the fluid was a little dark but cant complain....
Really happy to see the lack of metal and awesome gear pattern.... I will be leaving the rear end alone.... Been over ten years since i rebuild the rear end.... Sadly this is the first fluid change and the fluid was a little dark but cant complain....
0 2016/07/24 15:52:33
New cover on and torqued, i plan on replacing the bolts and possibly trying to center the cover better, really not excited about how the cover lined up, but its not leaking so i may just leave it ither than swapping out to me bolt at a time...
New cover on and torqued, i plan on replacing the bolts and possibly trying to center the cover better, really not excited about how the cover lined up, but its not leaking so i may just leave it ither than swapping out to me bolt at a time...
0 2016/07/24 15:52:37
So much better looking that the old steel cover!!! Still debating on painting it purple though,,, have this really cool looking metal cast paint i am going to try on an old ac bracket i have first and see how it comes out!!!
So much better looking that the old steel cover!!! Still debating on painting it purple though,,, have this really cool looking metal cast paint i am going to try on an old ac bracket i have first and see how it comes out!!!
0 2016/07/24 15:52:41
Pistons and valley cover installed....
Pistons and valley cover installed....
0 2016/07/27 19:23:37
0 2016/07/27 19:23:41
0 2016/07/27 19:23:45
Didnt have much time today so went ahead and installed cam, and retainer plate.. And put a regular non vvt cam reluctor on it just to prevent the cam from mysteriously finding its way out the back of the block, at least until i can find time to oull the engine off the stand and get the rear cover installed
Didnt have much time today so went ahead and installed cam, and retainer plate.. And put a regular non vvt cam reluctor on it just to prevent the cam from mysteriously finding its way out the back of the block, at least until i can find time to oull the engine off the stand and get the rear cover installed
0 2016/07/27 19:23:48
Back of the cam....
Back of the cam....
0 2016/07/27 19:23:50
And the stamp on the block...
And the stamp on the block...
0 2016/07/27 19:23:56
This trick flow spring compressor is the shiznit!!!! Dont know how i ever lived without it.... Just wish there was a way to easily just swap one spring.....
This trick flow spring compressor is the shiznit!!!! Dont know how i ever lived without it.... Just wish there was a way to easily just swap one spring.....
0 2016/07/28 22:59:22
Did all 8 on the one head in about 30 minutes.... And had a couple brainfarts along the way that slowed me down....
Did all 8 on the one head in about 30 minutes.... And had a couple brainfarts along the way that slowed me down....
0 2016/07/28 22:59:26
Stock springs....
Stock springs....
0 2016/07/28 22:59:29
Dont even have to remove the base to install the seats and seals....
Dont even have to remove the base to install the seats and seals....
0 2016/07/28 22:59:33
0 2016/07/28 22:59:35
Biggest benefit is the extra fluid capacity, depending on the cover they add between .5 and 1qt..
Biggest benefit is the extra fluid capacity, depending on the cover they add between .5 and 1qt..
0 2016/08/03 10:02:03
Timing cover installed
Timing cover installed
0 2016/08/04 16:24:13
Oil pan on....
Oil pan on....
0 2016/08/04 16:24:22
Finally buttoned up...
Finally buttoned up...
0 2016/08/11 15:34:35
Flexplate and rear cover on...
Flexplate and rear cover on...
0 2016/08/11 15:35:00
Balancer on, couldnt find the new bolt i have somewhere, need change the old bolt out when i find it...
Balancer on, couldnt find the new bolt i have somewhere, need change the old bolt out when i find it...
0 2016/08/11 15:35:32
Dipstick just in temporarily to seal the engine up...
Dipstick just in temporarily to seal the engine up...
0 2016/08/11 15:35:40
Trans and transfer case waoting to be installed...
Trans and transfer case waoting to be installed...
0 2016/08/11 15:36:29
The connectornon the right is the one in question.... I have not disconnected mine yet, but i want to find out what runs through it before i do.... And need find a harness that is compatible with it...
The connectornon the right is the one in question.... I have not disconnected mine yet, but i want to find out what runs through it before i do.... And need find a harness that is compatible with it...
0 2016/08/12 19:53:37
This is my l92 but the cast ly6/l96 will have the same basic thing but have either gen IV 6.0 or just IV 6.0 on the block usually in the bellhousing end and on the front of the block behind the ps pump bracket
This is my l92 but the cast ly6/l96 will have the same basic thing but have either gen IV 6.0 or just IV 6.0 on the block usually in the bellhousing end and on the front of the block behind the ps pump bracket
0 2016/08/16 22:42:22
Just make sure the block doesnt look like this...
Just make sure the block doesnt look like this...
0 2016/08/19 21:48:15
0 2016/08/19 21:48:17
0 2016/08/19 21:48:19
Non dod valley cover
Non dod valley cover
0 2016/08/23 08:27:16
The t27 bolt that holds the shifter in place
The t27 bolt that holds the shifter in place
0 2016/08/28 15:34:38
Old shifter, getting ready to come out...
Old shifter, getting ready to come out...
0 2016/08/28 15:34:46
Lowered the knee bolster and removed the tilt lever and column shrouds
Lowered the knee bolster and removed the tilt lever and column shrouds
0 2016/08/28 15:34:55
Shifter harness disconnected... Only reason i dropped the top of the knee bolster down really
Shifter harness disconnected... Only reason i dropped the top of the knee bolster down really
0 2016/08/28 15:35:01
Shofter boot slides on and off the shft lever!
Shofter boot slides on and off the shft lever!
0 2016/08/28 15:35:10
New shifter installed!!
New shifter installed!!
0 2016/08/28 15:35:20
Woudlve only taken one bend to get around the frame stiffening support....
Woudlve only taken one bend to get around the frame stiffening support....
0 2016/09/03 22:06:28