PROJECTS GALLERY Vehicle builds | Engine Swaps | Conversions | Installation write ups |
Sponsored by:
Sponsored by: CARiD

Slow and getting slower

Thread Tools
 
Search this Thread
 
Old Jun 9, 2012 | 11:59 PM
  #951  
Atomic's Avatar
Thread Starter
I have a gauge for that
15 Year Member
Loved
Liked
Community Favorite
iTrader: (42)
 
Joined: Jan 2006
Posts: 16,282
Likes: 438
From: Huntsville, AL
Default

I didnt know fastenal sold clevis bolts....or are you doing it differently?

The shock brackets I got from ebay, the seller was variations by valentino
Reply
Old Jun 10, 2012 | 08:02 AM
  #952  
03sierraslt's Avatar
Admin
iTrader: (22)
 
Joined: Jul 2004
Posts: 19,007
Likes: 221
From: Western PA
Default

No, not the clevis bolts. I was refering to the new lower shock bolts etc. I am doing mine the same way with the clevis. Just need to double check my measurements as I forget if I new 10" or 11" straps
Reply
Old Jun 11, 2012 | 07:33 AM
  #953  
Spoolin's Avatar
GFYS and STFU
iTrader: (8)
 
Joined: Jan 2007
Posts: 13,870
Likes: 4
From: Here and sometimes there too.
Default

Richard, at what fuel pressure are those injectors rated at, 48lbs no? Driver box or low impedance?
Reply
Old Jun 11, 2012 | 07:47 AM
  #954  
03sierraslt's Avatar
Admin
iTrader: (22)
 
Joined: Jul 2004
Posts: 19,007
Likes: 221
From: Western PA
Default

Originally Posted by Spoolin
Richard, at what fuel pressure are those injectors rated at, 48lbs no? Driver box or low impedance?
Low Impedance requires a Driver Box.
Reply
Old Jun 11, 2012 | 08:14 AM
  #955  
1slow01Z71's Avatar
Tin Foil Hat Wearin' Fool
iTrader: (36)
 
Joined: Oct 2004
Posts: 23,204
Likes: 4
From: Austin, TX
Default

You can post links to the stuff as long as a sponsor doesn't sell it.
Reply
Old Jun 11, 2012 | 08:52 AM
  #956  
Atomic's Avatar
Thread Starter
I have a gauge for that
15 Year Member
Loved
Liked
Community Favorite
iTrader: (42)
 
Joined: Jan 2006
Posts: 16,282
Likes: 438
From: Huntsville, AL
Default

Injectors were tested at 43.5psi and flowed 114.6lb/hr so at 58 psi should be 132lb/hr
Reply
Old Jun 12, 2012 | 12:28 PM
  #957  
Spoolin's Avatar
GFYS and STFU
iTrader: (8)
 
Joined: Jan 2007
Posts: 13,870
Likes: 4
From: Here and sometimes there too.
Default

Originally Posted by 03sierraslt
Low Impedance requires a Driver Box.
You know what I meant.

Originally Posted by Atomic
Injectors were tested at 43.5psi and flowed 114.6lb/hr so at 58 psi should be 132lb/hr
Sweet, should keep you busy for a little while.
Reply
Old Jun 12, 2012 | 01:36 PM
  #958  
idahoblkss's Avatar
TECH Fanatic
iTrader: (9)
 
Joined: Mar 2009
Posts: 1,189
Likes: 2
From: idaho
Default

Originally Posted by Atomic
I didnt get my 6.33 but I did get a 6.5x@103 with a 1.4x 60', https://www.performancetrucks.net/fo...2-73-a-502339/

...and I finally put this on...



lmao!!! tell me they let you keep it on at the track!!??
Reply
Old Jun 12, 2012 | 02:38 PM
  #959  
nonnieselman's Avatar
TECH Senior Member
iTrader: (10)
 
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Default

Have you got a boat prop in the hitch yet?
I saw one at bass pro the other day and thought about it.
Reply
Old Jun 12, 2012 | 02:58 PM
  #960  
Atomic's Avatar
Thread Starter
I have a gauge for that
15 Year Member
Loved
Liked
Community Favorite
iTrader: (42)
 
Joined: Jan 2006
Posts: 16,282
Likes: 438
From: Huntsville, AL
Default

I thought I needed 9s for that first?

I did get my new 127lb injectors installed, and after figuring out one of the wires was loose in the connector causing the injector to malfunction everything is good to go.

I havent been back to the track since putting my ladder rack on, so im not sure what they will say.
Reply



All times are GMT -5. The time now is 02:54 PM.