I hope I'm not late for work!
Aug 17, 2014 | 10:15 AM
#451
TECH Regular
Joined: Feb 2009
Posts: 406
Likes: 0
From: North Pole, Ak
This truck is one of my favorites. Always looking for your updates. Heck, I copied some of your setup for my current build. Thank you!
Aug 17, 2014 | 10:44 AM
#452
I was fustrated with my boost controller (eboost street) not doing what it should do so I got a 4port solenoid for it off ebay. The 4 port version works a whole lot better than the 3 port so now I am finally able to keep boost in it. Second time playing with it I set a PR of 6.27@112 with around 20psi. I am very happy with that, especially since my rear tires are getting pretty worn out.
I tried turning it up a little more and this is what happened at about 75% throttle
https://www.youtube.com/watch?v=HwOG...ature=youtu.be
Overall I am pleased with the setup. It seems the engine is tough enough to handle whatever the turbo throws at it, and the turbo is small enough that it cant break the engine. With some good tires and maybe loosing a little weight I dont think 5.99 is out of the question with a good prep.
I tried turning it up a little more and this is what happened at about 75% throttle
https://www.youtube.com/watch?v=HwOG...ature=youtu.be
Overall I am pleased with the setup. It seems the engine is tough enough to handle whatever the turbo throws at it, and the turbo is small enough that it cant break the engine. With some good tires and maybe loosing a little weight I dont think 5.99 is out of the question with a good prep.
Aug 17, 2014 | 05:47 PM
#455
Thread Starter
Joined: Jan 2006
Posts: 16,282
Likes: 438
From: Huntsville, AL
Thing definitely moves! The videos sound is kinda goofy, but it sounds like it falls on it's face in the video but with that time obviously it is not.
This truck is one of my favorites. Always looking for your updates. Heck, I copied some of your setup for my current build. Thank you!
This truck is one of my favorites. Always looking for your updates. Heck, I copied some of your setup for my current build. Thank you!
This is the solenoid I bought: Boost Solenoid BCS 4 Port Mac 46A AA1 Jdba 1BA for Turbosmart aem Hi Temp | eBay
The turbosmart one that is the same thing is about twice as much.
I attached a copy of my tune if you want to look at it feel free!
I dont really care about a 9 second pass since the 1/4 tracks are so far away from me. Everyone around here does 1/8 mile racing anyway. 5.99 in an 1/8 is still my goal...thinking about getting 4 slicks and trying to leave on 20psi
Aug 17, 2014 | 07:58 PM
#459
Thread Starter
Joined: Jan 2006
Posts: 16,282
Likes: 438
From: Huntsville, AL
The PE or BE table? Rich like what? I have it so its .85 or so from 0-4psi then .75 lambda above that, with the meth its around 0.7 lambda. I dont pull much fuel out if any. The fact that may VE table is relatively boring means the fuel pumps are doing their job 
