2011 CC LS SC "Silver Surfer"
#1
2011 CC LS SC "Silver Surfer"
Hello all just thought Id throw up some pics and stuff of my truck. I've been on GMFS for a few months and lurked around here. Thought I'd make it official as I'm running into a lot of members in person now that Im back on the mainland. Guys here are pretty knowledgeable and such a great resource for everyone! Hope to add to the knowledge base if possible.
My 2011 LS 4.8 CC Silverado
My mods done in the first 4 months of the trucks life. Tore it down at 2K on the odometer and built it then shipped it from Hawaii to San Diego. Drove it to Georgia and been living here for a few months now.
MOTOR MODS:
4.8 liter
Lysholm Twinscrew supercharger 9 psi boost 416 whp 442 ft lb tq
58 lb/hr SRT-4 injectors
NGK TR-7 plugs
Spintech muffler
SLP 160 thermostat
HP Tuner tuning
Vortech air to water heat exchanger
INTERIOR MODS:
Innovate motorsports air/fuel gauge
Innovate motorsports boost gauge
LT center console
Rear seat fold down
Full interior stinger sound deadening (Floor, roof, doors, firewall, back wall)
Llumar ceramic tint with Silver Surfer in back glass
ELECTRONICS:
Kenwood DDX-896
PAC audio steering wheel control
PAC audio onstar integration
Bluetooth audio integrated
Viper 5902 alarm with smartphone integration
Dual Stinger 2250 batteries
100 ft Stinger 0 gauge wire
Phoenix Gold volt gauge
Phoenix Gold Ti800.4 4 channel amp 200 watts by 4
2 Phoenix Gold Ti2500.1 Mono Amp 2500 watts each
4 Phoenix Gold Ti2 12 inch subs
Blow through 4th order bandpass enclosure
2 sets Phoenix Gold Ti 6.5 components
3 sets Stinger zero loss braided shielded RCA cables
AVS digital gauge with billet display
AVS ARC-7 Billet 7 switch panel wired into Viper 5902 alarm
EXTERIOR:
Carriage works black billet grill inserts
Carriage works black billet lower grill insert
Color matched grill and bowie
Color matched and shaved front bumper
Debadged Shaved tailgate
Sir Michaels tailgate handle relocator
Stylin Trucks rear Rollpan (Grant rollpan replacing this!)
Undercover hard tonnue cover shaved and colormatched
AVS billet license frame and LED tag light
Front inner fender tubs with Firewall tubbed
Rear bed notched and tubbed
Sprayliner bed liner
Rear frame/under bed POR 15 coated
Cab floor tunneled for drive shaft
SUSPENSION:
Ekstensive Metalworks Full Air Suspension
Relocated front UCA mounts
Tubular upper and lower control arms
Flipped Lower ball joint and 03 style Upper ball joint
Prothane polyurethane bushings front and rear
Airlift Dominator 2600 lb bags
Monroe Sensa track front shocks
Monroe Monotube rear shocks
8 SMC 1/2 inch valves
1/2 inch fill lines 3/8 inch dumps
Dual 5 gallon tanks in reinforced crash cage
Dual VIAR 444 compressors
Dual SMC water traps
4 inch narrowed rear end
3.73 Posi rear end
22x10 billet Radicalli by Intro Wheels
Nexen 285/40/22 Tires
My 2011 LS 4.8 CC Silverado
My mods done in the first 4 months of the trucks life. Tore it down at 2K on the odometer and built it then shipped it from Hawaii to San Diego. Drove it to Georgia and been living here for a few months now.
MOTOR MODS:
4.8 liter
Lysholm Twinscrew supercharger 9 psi boost 416 whp 442 ft lb tq
58 lb/hr SRT-4 injectors
NGK TR-7 plugs
Spintech muffler
SLP 160 thermostat
HP Tuner tuning
Vortech air to water heat exchanger
INTERIOR MODS:
Innovate motorsports air/fuel gauge
Innovate motorsports boost gauge
LT center console
Rear seat fold down
Full interior stinger sound deadening (Floor, roof, doors, firewall, back wall)
Llumar ceramic tint with Silver Surfer in back glass
ELECTRONICS:
Kenwood DDX-896
PAC audio steering wheel control
PAC audio onstar integration
Bluetooth audio integrated
Viper 5902 alarm with smartphone integration
Dual Stinger 2250 batteries
100 ft Stinger 0 gauge wire
Phoenix Gold volt gauge
Phoenix Gold Ti800.4 4 channel amp 200 watts by 4
2 Phoenix Gold Ti2500.1 Mono Amp 2500 watts each
4 Phoenix Gold Ti2 12 inch subs
Blow through 4th order bandpass enclosure
2 sets Phoenix Gold Ti 6.5 components
3 sets Stinger zero loss braided shielded RCA cables
AVS digital gauge with billet display
AVS ARC-7 Billet 7 switch panel wired into Viper 5902 alarm
EXTERIOR:
Carriage works black billet grill inserts
Carriage works black billet lower grill insert
Color matched grill and bowie
Color matched and shaved front bumper
Debadged Shaved tailgate
Sir Michaels tailgate handle relocator
Stylin Trucks rear Rollpan (Grant rollpan replacing this!)
Undercover hard tonnue cover shaved and colormatched
AVS billet license frame and LED tag light
Front inner fender tubs with Firewall tubbed
Rear bed notched and tubbed
Sprayliner bed liner
Rear frame/under bed POR 15 coated
Cab floor tunneled for drive shaft
SUSPENSION:
Ekstensive Metalworks Full Air Suspension
Relocated front UCA mounts
Tubular upper and lower control arms
Flipped Lower ball joint and 03 style Upper ball joint
Prothane polyurethane bushings front and rear
Airlift Dominator 2600 lb bags
Monroe Sensa track front shocks
Monroe Monotube rear shocks
8 SMC 1/2 inch valves
1/2 inch fill lines 3/8 inch dumps
Dual 5 gallon tanks in reinforced crash cage
Dual VIAR 444 compressors
Dual SMC water traps
4 inch narrowed rear end
3.73 Posi rear end
22x10 billet Radicalli by Intro Wheels
Nexen 285/40/22 Tires
Last edited by 3heartsurfer; 05-21-2012 at 08:17 PM.