2011 CC LS SC "Silver Surfer"
 

Hello all just thought Id throw up some pics and stuff of my truck. I've been on GMFS for a few months and lurked around here. Thought I'd make it official as I'm running into a lot of members in person now that Im back on the mainland. Guys here are pretty knowledgeable and such a great resource for everyone! Hope to add to the knowledge base if possible.

My 2011 LS 4.8 CC Silverado
Attachment 148726
Attachment 148727
Attachment 148728
Attachment 148729
Attachment 148730
Attachment 148731
Attachment 148732
Attachment 148733
Attachment 148734

My mods done in the first 4 months of the trucks life. Tore it down at 2K on the odometer and built it then shipped it from Hawaii to San Diego. Drove it to Georgia and been living here for a few months now.

MOTOR MODS:
4.8 liter

Lysholm Twinscrew supercharger 9 psi boost 416 whp 442 ft lb tq

58 lb/hr SRT-4 injectors
NGK TR-7 plugs
Spintech muffler

SLP 160 thermostat

HP Tuner tuning

Vortech air to water heat exchanger


INTERIOR MODS:
Innovate motorsports air/fuel gauge

Innovate motorsports boost gauge


LT center console


Rear seat fold down

Full interior stinger sound deadening (Floor, roof, doors, firewall, back wall)

Llumar ceramic tint with Silver Surfer in back glass


ELECTRONICS:
Kenwood DDX-896

PAC audio steering wheel control

PAC audio onstar integration

Bluetooth audio integrated


Viper 5902 alarm with smartphone integration
Dual Stinger 2250 batteries

100 ft Stinger 0 gauge wire

Phoenix Gold volt gauge

Phoenix Gold Ti800.4 4 channel amp 200 watts by 4

2 Phoenix Gold Ti2500.1 Mono Amp 2500 watts each

4 Phoenix Gold Ti2 12 inch subs

Blow through 4th order bandpass enclosure

2 sets Phoenix Gold Ti 6.5 components

3 sets Stinger zero loss braided shielded RCA cables

AVS digital gauge with billet display
AVS ARC-7 Billet 7 switch panel wired into Viper 5902 alarm


EXTERIOR:
Carriage works black billet grill inserts

Carriage works black billet lower grill insert

Color matched grill and bowie

Color matched and shaved front bumper

Debadged
Shaved tailgate
Sir Michaels tailgate handle relocator

Stylin Trucks rear Rollpan (Grant rollpan replacing this!)
Undercover hard tonnue cover shaved and colormatched
AVS billet license frame and LED tag light
Front inner fender tubs with Firewall tubbed
Rear bed notched and tubbed
Sprayliner bed liner
Rear frame/under bed POR 15 coated
Cab floor tunneled for drive shaft


SUSPENSION:
Ekstensive Metalworks Full Air Suspension
Relocated front UCA mounts
Tubular upper and lower control arms
Flipped Lower ball joint and 03 style Upper ball joint
Prothane polyurethane bushings front and rear
Airlift Dominator 2600 lb bags
Monroe Sensa track front shocks
Monroe Monotube rear shocks
8 SMC 1/2 inch valves
1/2 inch fill lines 3/8 inch dumps
Dual 5 gallon tanks in reinforced crash cage
Dual VIAR 444 compressors
Dual SMC water traps
4 inch narrowed rear end
3.73 Posi rear end
22x10 billet Radicalli by Intro Wheels
Nexen 285/40/22 Tires

Nice ride looks awesome

Thats sick man. Welcome!

Truck looks sick man. Just need painted mirrors and door handles to finish off the sooth look. That truck would be sick wit a 2011 HD hood and grill color matched

Thats alot of work on a new truck! Looks nice!

Damn, lots of work done to a brand new rig. Looks good

welcome to the site, awesome truck!

Very nice truck! Where are you located in GA?

Nice ride!!

DUDE!! Ridiculously awesome truck. What bedcover is that btw?

A fellow spintech user here as well, best mufflers available!!