don't think I'll be running a breather, I'll somewhat mimic the stock setup

 

Stock setup runs a "breather" That's what the pass side valve cover nipple running to the tb before the blade does. Lets it pull fresh clean air from there.

 

it will be close to a stock radix type setup but not exact, from what I'm reading it should be a non issue. If it becomes one, I can always add a second breather.

 

any other thoughts?

 

I'm trying a LS6 valley cover and PCV setup I've never had any issues with the stock Radix setup.

 

so your going to run straigh to a vacuum? im getting ready to plumb mine tommorrow. i have an amw catch can i plan on running. ill be running each pcv ( from the valve covers) to a t hose connection then to the oil catch can then to a spot on the intake pre blower so it always see vacuum and can catch any oil in case. hopefully i dont pull to much vacuum like bill did though.

 

I will run a catch can as well, just not sure about running a one way valve or not