4l80 swap issues
#21
On The Tree
iTrader: (1)
I used a Neapco slip yoke N3R-3-9131X... that part number is for gm 3r joints.. dont know what you're running, but this yoke is long and has a pretty deep counterbore, so less spline area, but seemed like plenty of contact... I didnt cut it down at all and has about 3/4-1 inch travel at ride height on my RCSB
#22
Launching!
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: Gilbert, AZ
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Thanks got everything together after waiting for the 4l80 shift cable bracket. Took it around the block, but it was late last night. Hopefully should be all wrapped up today!
#24
I used a Neapco slip yoke N3R-3-9131X... that part number is for gm 3r joints.. dont know what you're running, but this yoke is long and has a pretty deep counterbore, so less spline area, but seemed like plenty of contact... I didnt cut it down at all and has about 3/4-1 inch travel at ride height on my RCSB
Thread
Thread Starter
Forum
Replies
Last Post
Nimoryan
GMT 800 & Older GM General Discussion
0
07-05-2015 03:50 PM