PerformanceTrucks.net Forums
Took the mounting bracket off the drivers side of the diff that theyvwere nice enough to send me a spare, and checked the backlash and make sure there were no problems with teeth or bearings, everything seems good to go, smart move will be to just wait until i install the lift to swap this in....
Took the mounting bracket off the drivers side of the diff that theyvwere nice enough to send me a spare, and checked the backlash and make sure there were no problems with teeth or bearings, everything seems good to go, smart move will be to just wait until i install the lift to swap this in....
0 2017/02/08 19:51:30
Saw the harbess on the diff and figure they just disconnected it below the fuse box, which as much of the harbess as they sent and had to fish out, wouldve been easier than cutting it, but....
Saw the harbess on the diff and figure they just disconnected it below the fuse box, which as much of the harbess as they sent and had to fish out, wouldve been easier than cutting it, but....
0 2017/02/08 19:51:32
Looks something like this..
Looks something like this..
0 2017/02/10 21:46:23
I think youll be ok.
I think youll be ok.
0 2017/02/11 22:04:19
The three rings at the bottom with the bolt between the two are the membranes... had to dig this pic out of my thread... somehwere around page 33 or so!!!
The three rings at the bottom with the bolt between the two are the membranes... had to dig this pic out of my thread... somehwere around page 33 or so!!!
0 2017/02/17 19:54:52
Took this pic wehen inwent to wash my hands after the first customers car!
Took this pic wehen inwent to wash my hands after the first customers car!
0 2017/02/17 21:27:52
This was about 5:30 after ibfianlly had been back on it for a little bit!
This was about 5:30 after ibfianlly had been back on it for a little bit!
0 2017/02/17 21:27:55
I think bigger tires may be in order when these wear out, lol!! I need to go in and get the rear squared away and align it tomorrow....
I think bigger tires may be in order when these wear out, lol!! I need to go in and get the rear squared away and align it tomorrow....
0 2017/02/17 21:32:02
Modified the instructions for the brake line extension bracket to more fit my liking and not overextend the brake hoses...installed the brabket included to the diff and then bolted the factory bracket to it....
Modified the instructions for the brake line extension bracket to more fit my liking and not overextend the brake hoses...installed the brabket included to the diff and then bolted the factory bracket to it....
0 2017/02/18 13:04:35
Better shot of the factory bracket
Better shot of the factory bracket
0 2017/02/18 13:04:39
The hardest part of the rear suspension was the track bar bracket, at some point the whole rear diff shifted to the keft about an inch and a half...
The hardest part of the rear suspension was the track bar bracket, at some point the whole rear diff shifted to the keft about an inch and a half...
0 2017/02/18 13:04:43
Not overly thrilled with the shock brackets, eventually inwill find a set of shocks for it to get rid of the bracket, but for the time being it works
Not overly thrilled with the shock brackets, eventually inwill find a set of shocks for it to get rid of the bracket, but for the time being it works
0 2017/02/18 13:04:47
Was surprised and shocked it made the yukon taller than my 99!!
Was surprised and shocked it made the yukon taller than my 99!!
0 2017/02/18 13:04:52
Side view, may end up going to a slightly taller tire when these wear out, had a slight rubbing on a sharp turn, hopefully once i get the alignment straight that will be fixed!!
Side view, may end up going to a slightly taller tire when these wear out, had a slight rubbing on a sharp turn, hopefully once i get the alignment straight that will be fixed!!
0 2017/02/18 13:04:57
0 2017/02/19 16:01:40
After chasing threads and reinstalling the tie rods...not bad considering when i oeft it i had -1.6 on the keft and + 1.6 on the right toe
After chasing threads and reinstalling the tie rods...not bad considering when i oeft it i had -1.6 on the keft and + 1.6 on the right toe
0 2017/02/22 18:08:16
Alignement good enough to comforably drive and not tear my tires up, while i am letting it settle and the new struts wear in a bit, my caster dropped a bit since the other day... i left it right about 2.7/3.0 may end up having to readjust that in a week or two when i go back and recheck the torque on everything...
Alignement good enough to comforably drive and not tear my tires up, while i am letting it settle and the new struts wear in a bit, my caster dropped a bit since the other day... i left it right about 2.7/3.0 may end up having to readjust that in a week or two when i go back and recheck the torque on everything...
0 2017/02/22 18:08:20
These are the pliers for the center support snap ring, for anyone that has never seen them!!
These are the pliers for the center support snap ring, for anyone that has never seen them!!
0 2017/02/25 23:56:54
Yukons count?
Yukons count?
0 2017/02/28 16:50:50
0 2017/03/19 15:32:42
Theres the dunbell in the back of the engine
Theres the dunbell in the back of the engine
0 2017/03/19 22:18:06
Meaured 24.08 from back of head to end of the bolt
Meaured 24.08 from back of head to end of the bolt
0 2017/03/26 12:13:13
0 2017/04/02 18:15:42
13 in picture above part number is 15860242
13 in picture above part number is 15860242
0 2017/04/02 19:27:59
Think i may go back and add some more caster and bring the camber out a hair...
Think i may go back and add some more caster and bring the camber out a hair...
0 2017/04/03 21:08:50
Number 4 intake valvespring
Number 4 intake valvespring
0 2018/06/04 16:18:16
0 2018/06/04 16:18:40
0 2018/06/04 16:19:06
Ouch!!!
Ouch!!!
0 2018/06/04 16:27:14
0 2018/06/05 21:05:11
0 2018/06/08 09:27:56
Oh the carnage
Oh the carnage
0 2018/06/08 11:32:28
0 2018/06/08 14:18:12
Whole new meaning to beater, dont think there is a straight panel on it and the hood is red
Whole new meaning to beater, dont think there is a straight panel on it and the hood is red
0 2018/06/17 14:40:09
All shiny from the sun....
All shiny from the sun....
0 2018/06/17 16:22:37
Just a little gunked up
Just a little gunked up
0 2018/06/24 22:38:39
And a slight leak
And a slight leak
0 2018/06/24 22:38:46
0 2018/06/24 22:45:28
At the delaeship the day i did the used car check out on her
At the delaeship the day i did the used car check out on her
0 2021/03/04 20:58:42
Next to Christine
Next to Christine
0 2021/03/04 20:58:49