PerformanceTrucks.net Forums
Found a connector to use to replace the bundle of butt connectors i currently have to conect the fpcm and bank 1 downstream o2, sadly it is a fuel injector harness connector from a 2.4 equinox....
Found a connector to use to replace the bundle of butt connectors i currently have to conect the fpcm and bank 1 downstream o2, sadly it is a fuel injector harness connector from a 2.4 equinox....
0 2016/10/07 16:51:28
I moved my car into the yard.... Figure it afforded me about an extra 6-8 inches
I moved my car into the yard.... Figure it afforded me about an extra 6-8 inches
0 2016/10/08 19:06:38
At 9;45pm the water was damn near to the hubs on the 99
At 9;45pm the water was damn near to the hubs on the 99
0 2016/10/08 19:06:40
And to the body on the yukon....
And to the body on the yukon....
0 2016/10/08 19:06:41
Pictures from my second story bedroom window
Pictures from my second story bedroom window
0 2016/10/09 06:09:44
0 2016/10/09 06:10:01
This was about an hour or so ago... Only issue with the 99 was i had to jump it, which i kind of expected...
This was about an hour or so ago... Only issue with the 99 was i had to jump it, which i kind of expected...
0 2016/10/09 16:14:11
0 2016/10/13 14:31:55
Here is how my trabs started out a vette trans with ridiculously long output shaft
Here is how my trabs started out a vette trans with ridiculously long output shaft
0 2016/10/16 07:20:54
Vette bellhouing
Vette bellhouing
0 2016/10/16 07:21:10
Truck output shaft
Truck output shaft
0 2016/10/16 07:21:19
Truck/camaro torque converter/bellhousing
Truck/camaro torque converter/bellhousing
0 2016/10/16 07:21:26
Seat harness connector is corroded pretty good on passenger side, but for ow seat is working fine!!!
Seat harness connector is corroded pretty good on passenger side, but for ow seat is working fine!!!
0 2016/10/16 17:48:55
0 2016/10/16 17:49:00
The rear of the vette/4wd case, on 2wd one of the divets at 6 and 12 oclock to the shaft are open
The rear of the vette/4wd case, on 2wd one of the divets at 6 and 12 oclock to the shaft are open
0 2016/10/18 09:19:02
Here is a 2wd case...
Here is a 2wd case...
0 2016/10/18 09:22:49
Replaced and programmed fpcm tonight, as much water came out of the module i am surprised it ever ran... pulling it out covered half of my hand in water.... was still running out when i was pulling the mounting bolts
Replaced and programmed fpcm tonight, as much water came out of the module i am surprised it ever ran... pulling it out covered half of my hand in water.... was still running out when i was pulling the mounting bolts
0 2016/10/18 18:21:39
Got rid of these ugly ass red lenses
Got rid of these ugly ass red lenses
0 2016/10/24 20:33:33
For a set of denali tail lights
For a set of denali tail lights
0 2016/10/24 20:33:39
0 2016/10/24 20:33:44
Not the best picture, but i wasnt focusing on radio install at the time so much as the led conversion in the ac head...
Not the best picture, but i wasnt focusing on radio install at the time so much as the led conversion in the ac head...
0 2016/10/27 05:04:16
Reason i asked....
Reason i asked....
0 2016/11/02 20:57:22
Thought it looked familiar, but..... mines bigger!!
Thought it looked familiar, but..... mines bigger!!
0 2016/11/03 17:25:09
There is a spot on the driver side door, fender and (i am sure) the cab side that need to have the paint touched up, mostly due to someone not having a clue about bodywork...
There is a spot on the driver side door, fender and (i am sure) the cab side that need to have the paint touched up, mostly due to someone not having a clue about bodywork...
0 2016/11/11 18:40:48
I also swapped in the lower dash panel and added a usb port from an nnbs truck to my pioneer head unit for my phone and also eliminated the dash cupholders and wired in the power port in the center console/seat from an nnbs with the three cupholders...
I also swapped in the lower dash panel and added a usb port from an nnbs truck to my pioneer head unit for my phone and also eliminated the dash cupholders and wired in the power port in the center console/seat from an nnbs with the three cupholders...
0 2016/11/28 21:20:48
Double din and led conversion in all the switches and dash...
Double din and led conversion in all the switches and dash...
0 2016/11/28 21:47:22
0 2016/11/28 21:47:27
My truck started out as a base model LS with cloth manual split bench in lite titanium i think it was called, I had to replace the accumulator and heater core so I decided to go ahead and replace the entire entire interior and do all the mods i had been wanting to do.....
My truck started out as a base model LS with cloth manual split bench in lite titanium i think it was called, I had to replace the accumulator and heater core so I decided to go ahead and replace the entire entire interior and do all the mods i had been wanting to do.....
0 2016/11/28 21:47:31
0 2016/11/28 21:47:33
0 2016/11/28 21:47:35
0 2016/11/28 21:47:37
0 2016/11/28 21:47:39
Nnbs console/center seat...
Nnbs console/center seat...
0 2016/11/28 21:47:39
0 2016/11/28 21:47:44
Leather heated memory avalanche front buckets (that I still need to get recovered
Leather heated memory avalanche front buckets (that I still need to get recovered
0 2016/11/28 21:47:47
Tahoe LT door panels
Tahoe LT door panels
0 2016/11/28 21:47:51
0 2016/11/28 21:47:56
Changed the entire dash to an 04 and style in dark charcoal...
Changed the entire dash to an 04 and style in dark charcoal...
0 2016/11/28 21:48:01
Swapped out my front turn signal lenses, bought them like 3 months ago and got tired of the factory replacemants i had filling up with water, and the chrome had turned black! Was time to get these in finally!!
Swapped out my front turn signal lenses, bought them like 3 months ago and got tired of the factory replacemants i had filling up with water, and the chrome had turned black! Was time to get these in finally!!
0 2016/12/11 12:23:51
Adjuster for side bearing shims
Adjuster for side bearing shims
0 2016/12/12 12:40:11