Finished putting another rifle together :D 300WM
Jun 23, 2010 | 10:03 AM
#1
Thread Starter
TECH Senior Member
iTrader: (10)
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Finished putting another rifle together :D 300WM
I traded a set of cyl heads for a Savage 110 7mag, ordered a 300wm barrel and put it on after i got it threaded for the muzzle brake (waiting on a suppressor 
)
Shrewd Brake
On the way home from work yesterday we stopped by the range to test some different loads and run them over the chrono..
Traded a nitrous kit for the scope
Millet LRS 6-25x56, 20MOA EGW Base, TPS 35mm Rings, Rifle Basix trigger, Factory Savage 112 300wm 26" Barrel, NSS Heavy duty recoil lug, Choate US stock.
300yds
Best group was 1.625" with a 210gr Berger, 71grs powder, Win LR, 2750fps.
Worst group was 2.5" with 72grs.
Got a 600yd match Saturday so i gotta hurry up and work on a load that will do 1.5" or less at 300.
)Shrewd Brake
On the way home from work yesterday we stopped by the range to test some different loads and run them over the chrono..
Traded a nitrous kit for the scope
Millet LRS 6-25x56, 20MOA EGW Base, TPS 35mm Rings, Rifle Basix trigger, Factory Savage 112 300wm 26" Barrel, NSS Heavy duty recoil lug, Choate US stock.
300yds
Best group was 1.625" with a 210gr Berger, 71grs powder, Win LR, 2750fps.
Worst group was 2.5" with 72grs.
Got a 600yd match Saturday so i gotta hurry up and work on a load that will do 1.5" or less at 300.
Last edited by nonnieselman; Mar 21, 2011 at 06:09 PM.
Jun 23, 2010 | 10:06 AM
#2
Thread Starter
TECH Senior Member
iTrader: (10)
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
My buddys Tikka T3 Tactical .308 with my Millett scope off my .22-250.
168gr SMK will do .5moa all day long at 100yds
Changed the powder charge and it didnt do so good, so went back to the first one.
168gr SMK will do .5moa all day long at 100yds
Changed the powder charge and it didnt do so good, so went back to the first one.
Jun 23, 2010 | 01:48 PM
#3
TECH Resident
iTrader: (3)
Joined: Jun 2009
Posts: 918
Likes: 0
From: pearland texas 20 min south of houston
you need to take that choate tactical stock off and put on a diff one. that thing is a piece of junk. get a custom made glass bedded one. i bet that will help it out alot
Jun 23, 2010 | 02:39 PM
#4
Thread Starter
TECH Senior Member
iTrader: (10)
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
You gonna pay for it?
It will do just fine for what im goin to use it for.
Several of the guys i shoot Fclass with use the stock with a little bedding on the recoil lug and they are the top score shooters so...
Trending Topics
Jun 24, 2010 | 10:08 AM
#8
Thread Starter
TECH Senior Member
iTrader: (10)
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Good deal right there!!
He went down to paint the target while the barrels were cooling off.
and moving targets are funner :nunchuk1:
Jun 24, 2010 | 10:32 AM
#9
TECH Enthusiast
Joined: Jun 2005
Posts: 664
Likes: 0
From: Groton, Ct
Another nice setup... I gotta restock my 700 SPS-t, the factory stock on it is pretty much junk and the remington X-mark trigger is horseshit so that's gotta go too. I've been laid off too long to be putting money into my gear right now though. In the next couple weeks I should be starting at a new .gov job though, so I'll be all set then. I did however just pick up a new AK.... 
Anywho, those are some pretty decent groupings at 300. Mine aren't much better than that at 100, but I'm also trying to see how accurate milsurp **** can be for the time being.
Anywho, those are some pretty decent groupings at 300. Mine aren't much better than that at 100, but I'm also trying to see how accurate milsurp **** can be for the time being.
