I logged a 0-100mph run last night. I have my 1-2 shift set at 6750 and the 2-3 set at 6600. But on the logs its showing a 1-2 shift at 6450 and a 2-3 at 6400. Am I missing something?

 

Did you just change the RPM's, or did you adjust the shift at speed too?

 

just the rpm shift points. Do I need to bump the mph points as well?

 

Bring the shift MPH down.

 

do you have the correct tire calibration?

 

tire size is spot on. Looked at the log and the tune, the MPH is set to 38mph on the 1-2, Im shifting at 43. and 72mph on the 2-3 and Im shifting at 79

 

Bump the mph up until the rpm commanded is equal to actual shift rpm.

 

i have the same problem just turn the trany shift points up with the rev limiter but it hit rev limiter at 5900 and the shift set at 6000 and rev limiter at 6500 what im i doing wrong lol

sorry andy for hi jacking

 

I think this is the right move too. Let us know how it works for ya.

 

I prefer to keep my shift mph abnormally low so my RPM is the only thing that controls my shifts...