Help? All four O2 sensors showing low voltage...
Apr 12, 2007 | 11:34 AM
#1
Thread Starter
formerly Moze (2/24/2012)
iTrader: (22)
Joined: Apr 2006
Posts: 490
Likes: 0
From: Mesquite, TX
Help? All four O2 sensors showing low voltage...
I'm about to do a search, but thought I'd post to see if anyone has dealt with this and what the cause/fix might be.
Thanks in advance for any help...
After searching, it looks like there could be a number of causes but I couldn't nail anything down for sure. I'm hoping someone out there has dealt with all 4 throwing a low voltage code.
I'm going to check visible wiring and go from there. Any help is still much appreciated. Thanks guys.
Thanks in advance for any help...
After searching, it looks like there could be a number of causes but I couldn't nail anything down for sure. I'm hoping someone out there has dealt with all 4 throwing a low voltage code.
I'm going to check visible wiring and go from there. Any help is still much appreciated. Thanks guys.
Last edited by DamnYankee; Apr 12, 2007 at 11:51 AM.
Apr 12, 2007 | 11:57 AM
#3
Thread Starter
formerly Moze (2/24/2012)
iTrader: (22)
Joined: Apr 2006
Posts: 490
Likes: 0
From: Mesquite, TX
Hmmm...I'm not real familiar with HP Tuners, but it was throwing the PCM into 'safe mode' and the timing was like 19 degrees or some such thing. Not sure what else to offer. It was running way lean, but I forget what the numbers were.
Thread
Thread Starter
Forum
Replies
Last Post
zblee
GM Engine & Exhaust Performance
63
Jun 10, 2023 01:25 PM
Fast86z
GM Engine & Exhaust Performance
4
Aug 23, 2015 12:35 AM
TX Tahoe Z71
Site Suggestions
6
Aug 7, 2015 03:58 AM
Suburban2500
GMT 800 & Older GM General Discussion
2
Jul 14, 2015 02:10 AM
