I'm looking for the cheapest way to turn off all of torque management. I have a manual transmission on a 2001 3/4 ton with a 6.0L. The engine has no modifications. I want to run 87 octane. I use this truck offroad all the time. The only solution I have run across is a Diablo tuner for $400. Will the Diablo turn off all of torque management? Do I need to look at different tuners? My only desire is to get this damn torque management **** turned off. Thanks for all the help.

 

Correct me if i'm wrong but a Manual (standard) Transmission shouldn't have any TM!

 

Torque management pulls timing from the motor during auto trans shifts to protect the tranny. I believe the only torque management on your truck is your right foot

 

Why is it can can't hardly turn a tire over on black top? The thing bogs like crazy if I try to take off hard. I was told it was torque management so I wouldn't damage the read end, etc.

 

your in a heavy *** truck...3/4 ton and im guessing its 4x4 so that dosnet help.

why is it that the people who dont want traction get all the traction in the world, but the people who want traction cant get it

 

It is a 6.0 liter with a 3.73 14 bolt 9.5 inch rear end with an open differential.

 

I will correct you because you're wrong The trucks of course don't have any transmission tq management, however there is engine torque management too. You will need it removed by getting a tune of some sort. IHDude, If you lived closer to MN, I would just do it for free. Takes 5 MIN with HP Tuners.

-Joe

 

Thanks for the answer! Wished I was closer to Minnesota too. Anybody close willing to do the samething? Atlanta, etc?

 

Talk to Wait4me, he can hook you up with a little better tune and no TM for $157 bucks, of $75 if you send him your PCM. He is a sponsor---------------->

Calling him is best.

 

Well i was correct there is no tranny TM, but I will bow in your direction for a more complete response.