well it we be out monday night motor and trans. again .i am going to put some comp lifters,a new cam,new springs retainers,new push rods,and a few other things up the sleeve .oh yea i also am going to put some 4.10 in the rear and i got some 28" d/r on the way.i will be ready for nov. and i hope if all goes right to be alot faster than i am now.

after all this it is going to the dyno for sure.

 

good luck with it. ya wanna come help do mine in a few weeks. lol

 

do what?

 

Are you still doing the 408?

 

You shall find out soon enough

 

he is getting a 6L like everyone else these days

 

Well I Am Taking The Cam Out To Swap For A Bigger On And I Have To Get Different Push Rod And A Few Other Things And Just Want To Clean Up Under The Hood.i Am Getting Everything Together To Build A 402al Block.i Was Trying To Get A Cam With A 224/224 613/620 On A 114,but Comp Can't Cur It Something About The Lobe Cut.so I Am Going With The Tr224 With 1.85 Rockers And I Have To Get Different Push Rods.with The Tr224 And The 1.85 It Will Give Me 616 Lift.

 

i have a set of trick flow push rods if you need shorter ones but i think you probably need longer ones huh?

 

i have a gauge coming for me to check what length i need what is the length of the ones you have

 

7.350