Has anyone done this mod for the fog lights to come one with the low beams on a nnbs? I had this on my 04 and it worked like a champ. I have a 2012 now and it has a different configuration. I did find where someone was able to get the lows to come on with the highs but not the lows with the fogs.

 

Bump i have a 2012 to

 

Can someone post up a picture of this mod using the interior connector pinout method? As in an actual picture of the connector with diodes installed and where it is located under the dash

 

added fogs to mine, i hardly ever use my highs with this setup, the only time i do is when im on the freeway out here that is literally through the middle of the desert and has no street lights

 

Got a question. On the 99-02, if one was to ground the yellow wire. Do the fogs work since the lows are on?

 

No, it still doesn't work like that. I just grounded the yellow wire on mine this past weekend when I installed my hids. When I was testing the brights on the hids it still kills my fog lights.

 

Yeah bump again, I want highs, lows, and fogs on my 2000 to work.

Can never find an answer. Did this mod to my dmax years ago and it's great.

 

Could always do a relay off the high beam? that way when the highs come on, the lows automatically come on.. and then the fogs come on. hum..
i might try it tonight.

 

i've got a relay setup for the high-4 on my 2000 corvette, and it still don't keep the fogs on with the lows, and i think it's the same kind of setup - the BCM controls the fog power based on high-beam power
the truck ain't got factory fogs (i added my own on an independent circuit), so i can't tell you on there.