ok i just know im abouta get dogged out for this questoin but here goes...

how do you guys think a set of 96 camaro z28 rims would look on my truck???? AND BE HONEST!!

 

not without spacers....the offset is different...the only reason i know is i had a 99 jimmy that i tried my buddies 2000 z28 rims on, and the back of the wheel hit the leafs

 

yea that's one of my biggest concerns is that they may be too wide. my rims are either 7 or 8" and i know for a fact that these are 9" so i'm thinking it should fit.

 

Are these the 5-spokes or salad shooters? If they are the salad shooters then HELL no. Those are by far the ugliest wheels ever made.

 

You should find somebody you know and swap'em out and see how they look first. But IMO I wouldn't do it, old school lines with new school curves don't match.

 

true. i'm thinking i may do it temporarily until i get the rims that i really want.

 

negative.

 

salad shooters for the loss.

 

once again there f-body rims will not fit on any truck or suv. the wheel offset is different. the only way they will bolt on is with a set of wheel spacers, trust me i have been there done that...

and im speaking of GEN 5 f-body wheel to BTW...

 

i've seen the z06 wheels on a silvy once. it was 5 lug and all. the guy that owned the truck had the whole package, z06 front bumper cover, tailgate and roll pan. it would have probably looked ok had the truck been lowered. but it was stock ride height