Project "Blown HD" my 6/8 drop/shortblock/heads/cam/blower/tranny install
Apr 22, 2007 | 10:01 AM
#1311
Originally Posted by 2005SSR6Speed
I second that!!! The reward is when it is all finished!!! You need to help with mine when I get it back from Calibrations. It makes it so much easier with 2 people.
Apr 22, 2007 | 12:21 PM
#1314
Originally Posted by Richard@WCCH
This is very cool 
Perhaps there's enough guys to justify making and selling harnesses like this? Great work here you guys. Thanks for detailing this job.
Richard
Perhaps there's enough guys to justify making and selling harnesses like this? Great work here you guys. Thanks for detailing this job.
Richard
Bill
Apr 22, 2007 | 06:14 PM
#1315
Originally Posted by 1SlowHoe
They both use the same one huh? I was hoping the 122 had a little bigger one...
Apr 22, 2007 | 07:50 PM
#1316
Originally Posted by Bill Reid
Damn grippy... wiring looks good. That looks like more than a one man one day project
I still want to do this mod though...
Bill
I still want to do this mod though...Bill
Apr 22, 2007 | 09:12 PM
#1317
Originally Posted by Richard@WCCH
This is very cool
Perhaps there's enough guys to justify making and selling harnesses like this? Great work here you guys. Thanks for detailing this job.
Richard
Perhaps there's enough guys to justify making and selling harnesses like this? Great work here you guys. Thanks for detailing this job.
Richard
maybe bro, but these things wouldn't be cheap at all, as it's VERY Labor intensive, not to mention the cost of Heat Shrink
Last edited by moregrip; Apr 22, 2007 at 10:46 PM.
Apr 23, 2007 | 10:18 PM
#1319
Originally Posted by moregrip
Thanks again Joe!
Here's what we got done:
after we marked every drop point and turn we started heat shrinking:
clips off, heat shrink on:
finished 3 sections today:
Here's what we got done:
after we marked every drop point and turn we started heat shrinking:
clips off, heat shrink on:
finished 3 sections today:
