[img=http://img377.imageshack.us/img377/173/dsc02686cx6.th.jpg]


[img=http://img522.imageshack.us/img522/8373/dsc02688kv2.th.jpg]

i am going to be putting the harness in tomorrow and the battery and tring to start it tuesday are wednesday.


it has been a long time and it is getting close i am getting nervous



[IMG=http://img377.imageshack.us/img377/173/dsc02686cx6.th.jpg][/IMG]

 

Very cool. I've been wondering if you'd had it done and just didn't post it or not. Should be a blast. What are the spec's on the engine?

 

the motor is a 427 with full ported cnc l92 heads by pete at vmax motor sports and cam is like 238/242 7xx/7xx lift on a 110+2 car intake with a vmax 90* elbow and a 110mm throttle body

 

what did that start life out as? I didn't think you could go larger then a 416 out of a 6.0. pics of the truck?

 

gonna be a badazz setup when done man!!!

 

it was a 6.0 block the new blocks can go very large

thanks man i hope to have it all together waiting on a drive shaft

 

NA motor running just spray? whatcha think the outcome is gonna be as for RWHP? any idea!!!

 

Nice Randy! that bitch is gonna scream

 

it is builded for spray but it will be a while before i put it on.it will get 2 stages tho.

but the guys that help me put this together are saying n/a for now i should get 550 to the wheels.

the motor before the cam left off the motor is 13.25 to 1 after cam left off 12.5 to 12.7.