I have the 95 in the signature. I have a custom tune, headers, cold air intake, 670 cfm TBI, Performer TBI manifold, 4L60E with a shift improver and a Corvette Servo and a GU6 rear end. Soon to have Comp Cams 260AH-14, 212/214 duration @ .50 .444/.444 lift with a 114 lobe seperation and stock swirl port heads.

I'm considering the NOS or other brand TBI plate system 100-125 shot.

I'd like some feed back from anyone who is using or has used this system. I'd like to know the results, 1/8 & 1/4 mile performance, how many runs from a 10 lb. bottle ect?

Any and all advise is welcome. For close to $600 I want to know that I'll be happy with it.

 

I just sold that exact kit a week ago! I had it on a 90 SB 2wd with a bone stock 350 and 700r4. On the 135 tune the truck went from a 16.1 to a 14.0 spinning! The 135 tune would last me about 10 good passes. It was the most fun I ever had for 600 bucks!

 

Why did you sell it. Were there some draw backs with it? Do you remember how much it cost to fill a bottle?

 

$3.50/ pound down here so $35 for 10lb. bottle.

 

I havent had that truck going on 4yrs. It was just sitting in my garage. Prices vary here between 4-5 dollars a lb.

 

I understand, Just curious..

 

https://www.performancetrucks.net/fo...&highlight=tbi

guy has the tbi plate itself for 100 shipped... might save you some cash.

 

Thanks for the info.

 

LOL, thats the guy I sold the kit to, so thats THE kit!