"Project LS10"
Aug 25, 2011 | 02:31 PM
#91
Thread Starter
Joined: Nov 2006
Posts: 648
Likes: 0
From: Drivers seat in Columbia, Mo
There should be room to run them above it. The pic is from the garage floor looking up so it looks worse than it is. I will take another pic soon for ya.
Sep 1, 2011 | 02:33 PM
#93
I think you mean BRP longtubes... and from what I have seen from both CPW and BRP I like Jareds approach to a non-removable collector, but the welding is garbage. I chose the BRP headers and I'm very very happy with their product
Sep 1, 2011 | 03:03 PM
#94
Thread Starter
Joined: Nov 2006
Posts: 648
Likes: 0
From: Drivers seat in Columbia, Mo
Yep, that's what I was thinking. I have the mid's for a 4x4 s10 and they work with my set up and were way cheaper (bought them from a guy that never used them).
Oct 2, 2011 | 12:34 PM
#95
Thread Starter
Joined: Nov 2006
Posts: 648
Likes: 0
From: Drivers seat in Columbia, Mo
Decided its time to take this thing to my dads to weld on the frame and make a mod to the cross member. I will try to take pics but I forget sometimes when I am working on the truck.
Here is two pics of my tow rig, my trailer and my S10(1/2 of it) all together for the first time.
Here is two pics of my tow rig, my trailer and my S10(1/2 of it) all together for the first time.
looks great. Try to remember some pics man
Oct 3, 2011 | 07:04 PM
#98
Thread Starter
Joined: Nov 2006
Posts: 648
Likes: 0
From: Drivers seat in Columbia, Mo
The engine is done and ready to go. I also polished up the headers be cause when I got them they were really scratched. Here is some boring pics...
Oct 3, 2011 | 07:05 PM
#99
Thread Starter
Joined: Nov 2006
Posts: 648
Likes: 0
From: Drivers seat in Columbia, Mo
The engine is done and ready to go. I also polished up the headers be cause when I got them they were really scratched. Here is some boring pics...