who all here has a cam and other mods and can pass emisions ??

 

I'm installing an lq9 with heads shaved .020", TR224-114 cam, edelbrock shorties (tired of looking at rusted manifolds), and plan on passing emissions.

 

It is harder to pass in different states. In GA you are suposed to have cats but I don't, but they only check the computer for any thrown codes. If my truck hasn't thrown any codes and my gas cap tests good I will pass (as long as they don't do the visual inspection like they are supposed to I'm fine).

 

Agree, as long as you don't have to have the tailpipe sniffer, the OBD-II scan is a blessing in desguise (for passing emissions).

I plan on passing with a cam in the 240's and .620" lift on 112 LSA.

 

I passed emissions in Rutherford county in TN. They just did the visual and hooked it up. GTG with a good size cam, LTs, Offroad y and some more stuff. I do have a hi-flow cat that.

 

New Jersey is OBDII scan also, no sniffer on 96 and newer vehicles. I remember reading that guys have passed CA emissions with TR220-114's that were properly tuned (don't remember which engine size though).

 

the tune is very important when having to pass emissions. gotta love ohio, run whatever you got. CA probably wouldn't even let me across the border in some of the vehicles i've drove.

 

Everytime I see a vehicle that is falling apart in PA it has a Ohio plate haha. You can do anything in Ohio just dont speed they have rolling radar...

 

ok let me add this is swedish emissions so i will still need cats and yes it will be hooked up to a machine
its a guy in sweden that i ship bikes for he wants to mod his 04 but they have emissions in stockholm
so im thinkin custom tune
headers and y with cats (dynotech??)
hooker aroechamber single in single out
tr224???or 220
1.7 yella terra rockers
ssr intake(ported?) and a ported 90mm tb with drx adapter
a hsw plate kit
underdrive pulley
electric fans
an a cold air intake