GMT 800 & Older GM General Discussion 2006 & Older Trucks | General Discussion

Weight Reduction

Thread Tools
 
Search this Thread
 
Old Dec 28, 2006 | 07:59 PM
  #1  
Dock Rocker's Avatar
Thread Starter
12 Second Truck Club
 
Joined: Nov 2005
Posts: 1,451
Likes: 0
From: Jackson, MS
Default Weight Reduction

Took the truck to the scales the other day. With a full tank of gas, spare, toolbox with tools and a floor jack, I weighed in at 4260 lbs. I am going to a stock 15 inch wheel and drag radials in the rear so I will be loosing the 20's. If I go down to a quarter of a tank, loose the tool box and spare what do you think I can get my race weight down to?
Reply
Old Dec 28, 2006 | 08:11 PM
  #2  
beastmode's Avatar
Import Moderator
iTrader: (52)
 
Joined: Jul 2006
Posts: 7,041
Likes: 0
From: Pittsburgh, PA
Default

were you in the truck? id say ud probably lose bout 30lbs for the spare, depending on how many tools you got in the box probably 30-60lbs and probably least 100lbs going to the other wheels and tires. probably 100lbs for the gas tank to. id say anywhere from 250-300
Reply
Old Dec 28, 2006 | 08:14 PM
  #3  
Dock Rocker's Avatar
Thread Starter
12 Second Truck Club
 
Joined: Nov 2005
Posts: 1,451
Likes: 0
From: Jackson, MS
Default

Originally Posted by beastmode
were you in the truck? id say ud probably lose bout 30lbs for the spare, depending on how many tools you got in the box probably 30-60lbs and probably least 100lbs going to the other wheels and tires. probably 100lbs for the gas tank to. id say anywhere from 250-300
Yea I was in it but I will be in it at the track, so My big *** is what it is. I was hoping to get under 4k, I am going to strip it down before the Memphis track trip and get it weighed again. Went to the local Truck stop cast me 4 bucks
Reply
Old Dec 28, 2006 | 08:19 PM
  #4  
beastmode's Avatar
Import Moderator
iTrader: (52)
 
Joined: Jul 2006
Posts: 7,041
Likes: 0
From: Pittsburgh, PA
Default

Originally Posted by Dock Rocker
I was hoping to get under 4k
id say you got a pretty good chance
Reply
Old Dec 29, 2006 | 12:11 AM
  #5  
BlackLM7's Avatar
TECH Fanatic
 
Joined: Aug 2004
Posts: 1,814
Likes: 0
From: Las Vegas, NV
Default

I agree with beastmode. I think you have a good chance to get your truck under 4K. Those older body style trucks weigh less than the '99 to present trucks.
Reply
Old Dec 31, 2006 | 12:10 AM
  #6  
nonnieselman's Avatar
TECH Senior Member
iTrader: (10)
 
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Default

Donuts are real fun in his truck too.....
What about the Spare Tire Holder under the bed? Thats atleast 25lbs of scrap?

What about your Hitch? That has to weigh a good bit?

Thats all i can think of.
Reply
Old Dec 31, 2006 | 12:42 PM
  #7  
03chevy5.3rcsb's Avatar
TECH Apprentice
iTrader: (5)
 
Joined: Dec 2006
Posts: 305
Likes: 0
From: Bakersfield
Default

Mine was 4260 full tank and spare I wasn't in it
Reply
Old Dec 31, 2006 | 12:55 PM
  #8  
litreddevil's Avatar
Banned
iTrader: (4)
 
Joined: Oct 2003
Posts: 5,151
Likes: 1
From: From Houma La. Living n Ellisville Miss.
Default

a while back a friend of mine had a 94 and they weight in at 3600 with glass hood,had heater,a/c and to seat don't remember what kind of seat tho and a 1/4 tank gas.he also went through the truck if he did not need it it was gone.
Reply
Old Jan 1, 2007 | 01:32 PM
  #9  
97sicksled's Avatar
Launching!
 
Joined: Jan 2006
Posts: 240
Likes: 0
From: Ft. Myers
Default

Originally Posted by litreddevil
a while back a friend of mine had a 94 and they weight in at 3600 with glass hood,had heater,a/c and to seat don't remember what kind of seat tho and a 1/4 tank gas.he also went through the truck if he did not need it it was gone.
I know a guy that wanted to reduce weight so bad in his truck he drilled out the spot welds in the body panels and cut holes in the frame if he felt he didn't need it. Those type of guys are funny to watch but when you're the one thats supposed to help him, does that ever suck.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mikeyjm1
GM Engine & Exhaust Performance
17
Oct 29, 2015 11:04 PM
thunder550
Trucks and SUV Classifieds
9
Oct 8, 2015 04:53 PM
MOBBN
FORCED INDUCTION
3
Sep 22, 2015 08:07 PM
tboy22
TOWING & OFFROAD PERFORMANCE
3
Sep 13, 2015 09:10 PM
Sjeverette3
GM Drivetrain & Suspension
11
Sep 2, 2015 01:32 AM




All times are GMT -5. The time now is 03:22 PM.