GOING TO A FORD RACE WITH MY CHEVY
#1
TECH Addict
Thread Starter
Join Date: Mar 2002
Location: Baton Rouge, LA
Posts: 2,146
Likes: 0
Received 0 Likes
on
0 Posts
Re: GOING TO A FORD RACE WITH MY CHEVY
good luck. let us know how that goes.
by the way, when you get done over there you should go find a dodge meet. we all know they are PERFORMANCE MACHINES and quarter mile monsters too. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
by the way, when you get done over there you should go find a dodge meet. we all know they are PERFORMANCE MACHINES and quarter mile monsters too. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
#2
GOING TO A FORD RACE WITH MY CHEVY
Going to the ford shootout at Rockingham Dragway this weekend. I'm going to run my 02 chevy sb 2wd truck. Just added a 2stage NX kit whent up to a 4.10 from 3.73 also got some ET STREETS 30X12.5X15
I have ran some 8.50 on one stage and my street tires in the 1/8. Running the 1/4 going to spray 50 shot out the hole and 100 at 3,000 rpm maybe if i don't brake anything i will run in the high 12's........CHEVY V/S FORD EVERYONE WISH ME LUCK
I have ran some 8.50 on one stage and my street tires in the 1/8. Running the 1/4 going to spray 50 shot out the hole and 100 at 3,000 rpm maybe if i don't brake anything i will run in the high 12's........CHEVY V/S FORD EVERYONE WISH ME LUCK
#3
Adkoonerstrator
iTrader: (4)
Join Date: Nov 2001
Location: Deep in the seedy underworld of Koonerville
Posts: 21,436
Likes: 0
Received 3 Likes
on
2 Posts
Re: GOING TO A FORD RACE WITH MY CHEVY
Good luck! <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> 12's shouldn't be a problem if you went 8.50's on street tires and one stage. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
I'd like to ask a couple question if you don't mind.
What rims are you running those ET Streets on? Did you have to clearance the brake calipers for the rims to fit?
Lastly, I'm going to move this over to the chat section. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Thanks
John
I'd like to ask a couple question if you don't mind.
What rims are you running those ET Streets on? Did you have to clearance the brake calipers for the rims to fit?
Lastly, I'm going to move this over to the chat section. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Thanks
John
#5
TECH Junkie
iTrader: (1)
Join Date: Sep 2002
Location: Conroe, TX
Posts: 3,085
Likes: 0
Received 0 Likes
on
0 Posts
Re: GOING TO A FORD RACE WITH MY CHEVY
Rockingham from Wilson? Damn, talk about a long drive (if its the wilson over by Goldsboro/Kinston area) Hope you kick some Lightning and Blue Oval *** <img border="0" alt="[devil]" title="" src="graemlins/gr_devil.gif" /> nothing like showing those posers, i mean performance enthusiests what us Bowtie fanatics have....keep up the good work!! <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
#6
Re: GOING TO A FORD RACE WITH MY CHEVY
I'm running the WELD SUPER SINGLE 4/58 back space and i had to do alot of grinding to get them to fit. When i ran the 8.50's i didn't spray until about 30feet out with a 100. When i get back i'm going with a 3000 YANK and some ASM headers.
#7
Re: GOING TO A FORD RACE WITH MY CHEVY
I went to the track and the best time i could get was a 13.3 at 104 best 60 time was a 1.99. I need a TQ bad i didn't want to spray it to hard out the hole so i sprayed 75 and at 3,000 another 75 come in.Next mod will be a TQ not to bad for 4.10's, Taylor wires, air box, Flowmaster, Servo,ET Streets, and NX 2 stage kit
Trending Topics
#8
Launching!
iTrader: (36)
Join Date: Feb 2002
Location: Baton Rouge, LA
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
Re: GOING TO A FORD RACE WITH MY CHEVY
I assume you have the 5.3? I'm trying to figure out the greatest potential times for my little 4.8. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Thread
Thread Starter
Forum
Replies
Last Post
FlowmasterMufflers
Ford Engine & Exhaust Performance
1
11-24-2015 01:00 PM
Tigger Welder
INTERNAL ENGINE MODIFICATIONS
14
10-01-2015 08:41 AM
lilrobo
Tuning, Diagnostics, Electronics, and Wiring
20
09-24-2015 07:45 AM
TAPyvehc93
FORCED INDUCTION
1
09-12-2015 08:19 PM