West Coast Cylinder Heads - CNC'd HIP'd ProPort - 4.8 / 5.3 / 5.7 / 6.0 - NEW!
Jul 11, 2009 | 05:19 PM
#1
West Coast Cylinder Heads - CNC'd HIP'd ProPort - 4.8 / 5.3 / 5.7 / 6.0 - NEW!
These heads were built for a 4.8L/5.3L turbo motor we were going to build for Bonneville but had to change directions and need to sell these heads to finish our motor.
These heads have the same runners and combustion chamber as the heads that Car Craft used to make 460hp N/A with a junkyard 5.3. They would be perfect for a turbo buildup because they have the best seats you can get from C.H.E (http://cheprecision.com/html/home.html) to evacuate heat from the valves quickly and efficiently.
The CNC program run on them now is for a 4.8 or 5.3 but WCCH can cut them to any of their port/CC configurations for LS1 or LS2. Check out the flow numbers here (http://www.proheads.com/datasheet.html) under the following headings:
WCCH-Edelbrock 200cc 4.8l/5.3l
WCCH-Edelbrock 215cc LS-1
WCCH-Edelbrock 245cc LS-2
We have over $2700 in the heads but would sell them for $1800 so we can get the parts we need to finish our motor. Call Richard @ WCCH for head questions and PM me here if you are interested in a great deal on some awesome heads.
I also have a set of custom Wiseco turbo pistons/pins/rings for a 4.8 / 5.3 which I would sell for half what we paid. They have never been out of the box! $750
Kix
These heads have the same runners and combustion chamber as the heads that Car Craft used to make 460hp N/A with a junkyard 5.3. They would be perfect for a turbo buildup because they have the best seats you can get from C.H.E (http://cheprecision.com/html/home.html) to evacuate heat from the valves quickly and efficiently.
The CNC program run on them now is for a 4.8 or 5.3 but WCCH can cut them to any of their port/CC configurations for LS1 or LS2. Check out the flow numbers here (http://www.proheads.com/datasheet.html) under the following headings:
WCCH-Edelbrock 200cc 4.8l/5.3l
WCCH-Edelbrock 215cc LS-1
WCCH-Edelbrock 245cc LS-2
We have over $2700 in the heads but would sell them for $1800 so we can get the parts we need to finish our motor. Call Richard @ WCCH for head questions and PM me here if you are interested in a great deal on some awesome heads.
I also have a set of custom Wiseco turbo pistons/pins/rings for a 4.8 / 5.3 which I would sell for half what we paid. They have never been out of the box! $750
Kix
Trending Topics
Jul 17, 2009 | 01:28 PM
#8
compression height: 1.306"
-11cc dome
.350 deck thickness (to handle heavy boost)
let me know if you need to know anything else.
I can send pics if you are interested.
Kix
-11cc dome
.350 deck thickness (to handle heavy boost)
let me know if you need to know anything else.
I can send pics if you are interested.
Kix
Thread
Thread Starter
Forum
Replies
Last Post
GrooveCityZ71
GM Engine & Exhaust Performance
7
Aug 31, 2015 12:05 PM
sauldgold
GM Engine & Exhaust Performance
3
Jul 23, 2015 02:15 PM
