Pistons are sold!!!!








These pistons are new in box, and fit both LS1, and L92 style heads.

-Bore 4.005"
-Stroke 3.622''
-Dish volume +13.6cc
-Compression'' 1.305''
-6.125'' Rod
-.927'' pin
-Weight after cnc lighten 465 grams piston.
-1.5x1.5x3.0mm Ring pack
-Top ring -.300'' down









I had these pistons custom built by Racetec pistons(former owner of JE pistons). They were built for 20+ psi of boost, and 1000+HP. They are a 2618 meterial that can be ran as tight as .004'' although I would go closer to .005 They also have upgraded tool steel .180'' wall pins. The pistons were then cnc lightend, and lateral gas ported by Patterson Racing engines in KS. These are a great set of pistons, but the 3 months between Racetec, and patterson they got me in a bind with my customer, and I had to take another rout. I'm in these pistons well over $1000.00 but have no use for them now. The cnc lightening, and gas ports was over $300.00 not to mention the $100 to ship the pistons all over the country. I'm asking $750.00 for the gas ported, cnc lightend pistons, .180'' wall pins, and locks

 

One more

 

Bump!

 

Snoozers are loozers!!!!!

 

that was a good deal for someone. Those look like good, thick wrist pins!

 

Youre good at selling pistons Jarrett sell mine for me

 

Pretty easy when you sell a set of 1200.00 pistons for 720.00 lol

 

Yes they are a really stout set of pistons and pins. Prob hold well over 1500hp in the right hands. I just can't use them in the engines I build because of the cost and build time. Im going to be testing the new Mahle 2618 boost piston in my new 365 truck engine, and the Autotec shelf piston(like cody's) in my 76mm class nova. The Autotec piston is a really nice piece for the $$$

 

You need to just run em! Put a little maggy, or one of Kyles small kits on and go! That light weight piston, with a TC76, and the right cam will hit just about as hard as anything.