E-Fan harness dual pin
Trending Topics
#9
Teching In
iTrader: (2)
Join Date: Jul 2012
Location: San Jose, CA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
yes, read on here and else where some trucks use this:
when using Flex-a-lite e-fans, was wondering if i need to still pick one up if using your harness. i have the front end apart doing a slow blown waterpump & cameshaft upgrade, since everything is off @ this point, wanted to upgrade to LS1 style or 05-up factory e-fans.
when using Flex-a-lite e-fans, was wondering if i need to still pick one up if using your harness. i have the front end apart doing a slow blown waterpump & cameshaft upgrade, since everything is off @ this point, wanted to upgrade to LS1 style or 05-up factory e-fans.
#10
This setup does not need variable speed control, ground one of the pcm wires and both fans run low speed, ground both pcm wires and both fans run high speed.
Obviously a tune is the best way to run the fans so they are automatic...but you could just use a toggle switch.
Obviously a tune is the best way to run the fans so they are automatic...but you could just use a toggle switch.