NEW LOWER PRICE!

I have a set of 3" drop control arms that will be coming off the HD tomorrow. Going a different direction with this truck again. I have seen the 6/8 kit pics and never liked how those trucks sat, front still was way too low...so IMO these are perfect with a flip kit rear and even dropped more than 3" they still aligned fine. They were slightly used when i got them, and have been on under 2 months. I also have an almost new set of summit sport shocks to go with it. I picked these up new, so they might have 1000-1300 miles on them as well. looking for $200 shipped OBO for all. I believe the retail on the arms is around 400$ new.

 

bump. arms and shocks are off and ready to ship!

 

you have any pics when you had them on the truck? trying to figure out if im going to be able to keep the 22"

 

let me get a couple. Hang on...







that wasn't fully decranked. shortly after i did crank it up a hair, but i was on stockers with 265/75/16s. i had SLIGHT rubbing on the inner fenders but i could have zip tied it back to fix it, just never got around to it.

being that its torsion bars, it obviously can be adjusted a couple inches one way or the other. it was able to be aligned with no prob making it level with the 8" rear drop.

 

thats the stance i want so i buy your kit and ill give me the drop in the front like the pics what do i need for the back? im ready to buy the kit

 

In the pics i had a 8" djm flip kit. i think they retail for about $250-300. Its a complete rear kit, carrier bearing lift bracket, notches with bumpstops, u bolts, plates, and spring perches. everything was nice but i wasn't a fan of the perches. We had it pretty well complete in a day and a half. Its a great stance, handled great and towed great with helper bags. I recommend the route i took and do the arms and a flip kit and adjust t-bars till you get the front how you want it.

 

where did you get the flip kit?

 

will these fit a 99 silverado z71?? I put drop spindles and it lowered it but i want to drop it more..

 

will not work on a 1500. Has to be an 8 lug truck. 1500HD, 2500, 2500HD, or 3500.

i ended up picking my flip kit up on ebay. There is a guy, norcalSS, on gmfullsize.com that is a DJM distributer and can get you a good price on the kits.

 

bump. some interest was shown, but no money has transferred hands!