A few months ago, I posted I was working on a kit. Well its almost done.

We will have setups for 550HP, 650HP, and 750HP all at flywheel.

The first 2 will be ready pretty quickly.

We are using a PT67 Turbo with Air to Air intercooler. Extremely easy setup. ANYONE can do it with a little knowledge of mechanics. Similar to a bolt on blower.

It will be emissions legal, and it just so happens very close to CARB legal which we are working on now.

Our test trucks are a 03 silverado and 04 tahoe. The silverado we did not test out on the track, but the Tahoe did 12.667 at 607 HP with Auto 4 x 4 activated. We are tweaking the tune so that the shifts are easier on the tranny. With 650 HP you should be at very high 11s to very low 12s. Completely stock truck except for a magnaflow muffler. Once we finish, we will have complete dyno results including videos of the track runs.

Problem is that the tranny needs to be taken care of. So you must use our conservative tune or build your tranny for more of an agressive tune.

Thanx.

 

Do you have any pictures of this set-up as of right now? Thanks.

 

will not disclose pictures yet. But will say its not mounted in the engine bay.

Thanx.

 

sounds interesting keep us posted as things come along

 

Whats the price range on this setup?