Thanks Fellas
Aug 15, 2005 | 10:01 AM
#1
Thread Starter
On The Tree
iTrader: (1)
Joined: Aug 2004
Posts: 136
Likes: 0
From: College Station, TX
Thanks Fellas
I just wanted to say thanks for the help. I got the truck running right, with oil pressure 
.
For those that have no idea what I'm talking about- I had a horrible tick right after the cam was installed. Installed new lifters, still had the tick. Installed a nice shiny blue, rubbery o-ring in the oil pick-up tube and that fixed the problem. I now have around 50 at idle and 60-70 under load.
I also got the ARP rod bolts in. Now I can drive it w/o worry.
Yall have no idea how happy I am
. The truck pulls pretty hard, but I think it could be a little better (prob need to give the tune some time). I'm gonna get HPTuners and play around with it. Bryan(PCMForLess) did a good job, but I just want to get some tuning experience.
Thanks again.
Chad
. For those that have no idea what I'm talking about- I had a horrible tick right after the cam was installed. Installed new lifters, still had the tick. Installed a nice shiny blue, rubbery o-ring in the oil pick-up tube and that fixed the problem. I now have around 50 at idle and 60-70 under load.
I also got the ARP rod bolts in. Now I can drive it w/o worry.
Yall have no idea how happy I am
. The truck pulls pretty hard, but I think it could be a little better (prob need to give the tune some time). I'm gonna get HPTuners and play around with it. Bryan(PCMForLess) did a good job, but I just want to get some tuning experience.Thanks again.
Chad
Aug 15, 2005 | 10:09 AM
#2
Originally Posted by chevyerett
I just wanted to say thanks for the help. I got the truck running right, with oil pressure .
For those that have no idea what I'm talking about- I had a horrible tick right after the cam was installed. Installed new lifters, still had the tick. Installed a nice shiny blue, rubbery o-ring in the oil pick-up tube and that fixed the problem. I now have around 50 at idle and 60-70 under load.
I also got the ARP rod bolts in. Now I can drive it w/o worry.
Yall have no idea how happy I am. The truck pulls pretty hard, but I think it could be a little better (prob need to give the tune some time). I'm gonna get HPTuners and play around with it. Bryan(PCMForLess) did a good job, but I just want to get some tuning experience.
Thanks again.
Chad
. For those that have no idea what I'm talking about- I had a horrible tick right after the cam was installed. Installed new lifters, still had the tick. Installed a nice shiny blue, rubbery o-ring in the oil pick-up tube and that fixed the problem. I now have around 50 at idle and 60-70 under load.
I also got the ARP rod bolts in. Now I can drive it w/o worry.
Yall have no idea how happy I am
. The truck pulls pretty hard, but I think it could be a little better (prob need to give the tune some time). I'm gonna get HPTuners and play around with it. Bryan(PCMForLess) did a good job, but I just want to get some tuning experience.Thanks again.
Chad
Thread
Thread Starter
Forum
Replies
Last Post
dry_kill
GMT 800 & Older GM General Discussion
11
Aug 28, 2015 09:53 PM