Radix GT2-3, LS2 90MM TB Results 94 RWHP
May 5, 2006 | 02:23 PM
#1
Thread Starter
Joined: Mar 1986
Posts: 18,749
Likes: 8
From: Chatsworth, CA
Radix GT2-3, LS2 90MM TB Results 94 RWHP
Here is the mix:
2001 GMC Yukon
5.3L
Radix 3.2 pulley
GT2-3 Cam
LS2 TB Conversion w/ West Coast Cyl Head flange
21* of timing
11.99-12.0 AFR W/ Wideband
**NOTE THE LAST PULL WAS WITH THE CUT OUT OPEN
I have come to the conclusion that this is the BEST street set up you can get! The LPE GT2-3 Cam and Radix/90mm TB set up complement each other well!
here is a copy of the dyno chart so you can see how well the parts work together.
2001 GMC Yukon
5.3L
Radix 3.2 pulley
GT2-3 Cam
LS2 TB Conversion w/ West Coast Cyl Head flange
21* of timing
11.99-12.0 AFR W/ Wideband
**NOTE THE LAST PULL WAS WITH THE CUT OUT OPEN
I have come to the conclusion that this is the BEST street set up you can get! The LPE GT2-3 Cam and Radix/90mm TB set up complement each other well!
here is a copy of the dyno chart so you can see how well the parts work together.
Last edited by BlownChevy; May 5, 2006 at 05:07 PM.
What a fantastic package. 
May 5, 2006 | 03:11 PM
#7
+90rwhp +30rwtq, that'll do just nicely. Also there looks to be no loss in TQ at the lower rpms and increased TQ being realized @ approx 2700rpms. I bet that heavy suburban likes some of that action
Last edited by moregrip; May 5, 2006 at 03:29 PM.
