if you get a cam do you have to do computer work? i thought i heard someone say that after a 100 miles or so that the computer will automatically adjust to the cam. any ideas thoughts on this?

<small>[ April 16, 2002, 01:30 AM: Message edited by: Phatchevy ]</small>

 

It all depends on what size cam and especially how much overlap you go with.. The ls6 cam and most low - mid range cams will run great without tuning. Usually idle is the first thing to be effected and your ECM will not learn that out ..

 

what about a 206/212 112lsa cam? i hope the pcm will learn this cam as well as the .4 liter increase n size?