GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

062 cam results ,track times

Thread Tools
 
Search this Thread
 
Old Nov 5, 2004 | 09:13 PM
  #1  
Kano's Avatar
Thread Starter
TECH Fanatic
iTrader: (3)
 
Joined: Oct 2003
Posts: 1,612
Likes: 0
From: Winston Salem NC
Default 062 cam results ,track times

just got back from the track
before cam 9..50@75
tonight 9.24@78
I got my tune today but didnt run it
when I got the retune I had it tuned for the transgo
with 100% tm out etc etc etc
I put it in today and man good godomighty
Ive never left 75' blackmarks before

only probs was I havent installed the transgo yet
and I could hear the tranny slip so I didnt run it with the tune
at the track tonight
im gonna wait till I get the transgo in
Im thinkin the way it felt with the tune I should be hitting
9.0's maybe high 8's

I dont know but 3 tenths in an eighth aint that bad
and theres a lot left with that grey box on my table
I felt that today
Reply
Old Nov 5, 2004 | 09:58 PM
  #2  
twobit's Avatar
TECH Enthusiast
iTrader: (12)
 
Joined: Jun 2002
Posts: 530
Likes: 0
From: Allen, Texas
Default

Reply
Old Nov 5, 2004 | 10:04 PM
  #3  
RedVHO's Avatar
Staging Lane
 
Joined: Oct 2004
Posts: 58
Likes: 0
Default

Originally Posted by gamedawgx53
just got back from the track
before cam 9..50@75
tonight 9.24@78
I got my tune today but didnt run it
when I got the retune I had it tuned for the transgo
with 100% tm out etc etc etc
I put it in today and man good godomighty
Ive never left 75' blackmarks before

only probs was I havent installed the transgo yet
and I could hear the tranny slip so I didnt run it with the tune
at the track tonight
im gonna wait till I get the transgo in
Im thinkin the way it felt with the tune I should be hitting
9.0's maybe high 8's

I dont know but 3 tenths in an eighth aint that bad
and theres a lot left with that grey box on my table
I felt that today
Your running the 062 without a converter? What were your 60 ft. times?
Reply
Old Nov 6, 2004 | 11:20 AM
  #4  
Kano's Avatar
Thread Starter
TECH Fanatic
iTrader: (3)
 
Joined: Oct 2003
Posts: 1,612
Likes: 0
From: Winston Salem NC
Default

2.08 sixty foot
Reply
Old Nov 6, 2004 | 11:23 AM
  #5  
Sport Side's Avatar
TECH Veteran
iTrader: (6)
 
Joined: Nov 2003
Posts: 4,397
Likes: 0
From: Tallahassee, FL
Default

Originally Posted by gamedawgx53
2.08 sixty foot
compared too..
Reply
Old Nov 6, 2004 | 11:25 AM
  #6  
Kano's Avatar
Thread Starter
TECH Fanatic
iTrader: (3)
 
Joined: Oct 2003
Posts: 1,612
Likes: 0
From: Winston Salem NC
Default

2.1 to 2.2 before
Reply
Old Nov 6, 2004 | 11:35 AM
  #7  
Seeing Red Again's Avatar
TECH Enthusiast
 
Joined: Jan 2003
Posts: 537
Likes: 0
From: Kernersville, NC
Default

Congrats! We definately need to race sometime to see how much of a gain you got from your mods. While I'm mostly stock that is...
Reply
Old Nov 6, 2004 | 11:45 AM
  #8  
Kano's Avatar
Thread Starter
TECH Fanatic
iTrader: (3)
 
Joined: Oct 2003
Posts: 1,612
Likes: 0
From: Winston Salem NC
Default

hell lets do it I pm'd ya several months ago
wheres the closest 1/4 fayetteville?
I wanna get on the board
Reply
Old Nov 8, 2004 | 04:57 PM
  #9  
Seeing Red Again's Avatar
TECH Enthusiast
 
Joined: Jan 2003
Posts: 537
Likes: 0
From: Kernersville, NC
Default

Originally Posted by gamedawgx53
hell lets do it I pm'd ya several months ago
wheres the closest 1/4 fayetteville?
I wanna get on the board
Rockingham is another one that's about the same distance, maybe a little closer. I think they only have Friday night drags. I got my times from when I lived in Florida.
Reply
Old Nov 9, 2004 | 08:31 AM
  #10  
marc_w's Avatar
TECH Addict
 
Joined: Oct 2003
Posts: 2,618
Likes: 0
From: Central, MA
Default

Awesome.

I cut my 2.13 with my stock converter (and the 047 cam). ((Different trucks though.))

I'm HIGHLY confident I could get my 60' down to 2.0X, and 1/4 times down another .2-3 with more tuning. In HPTuners 1.5 - there were about two more power-limiting tables uncovered for my '04. I free'd them up and for the heck of it I pulled out all of my TM yesterday. The difference is HUGE. I gained a lot of lowend at cruising and highway speeds.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ARC
GMT 800 & Older GM General Discussion
57
Feb 21, 2022 10:54 AM
The_W
GM Engine & Exhaust Performance
1
Oct 28, 2015 09:00 PM
low2001gmc
GM Parts Classifieds
0
Jul 23, 2015 05:10 PM
projectnightcrawler
GM Engine & Exhaust Performance
5
Jul 19, 2015 11:30 PM
GRRR65GTO
INTERNAL ENGINE MODIFICATIONS
2
Jul 10, 2015 08:27 PM




All times are GMT -5. The time now is 02:50 PM.