GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

04 silverado shooting flames!!!

Thread Tools
 
Search this Thread
 
Old Apr 12, 2013 | 10:11 AM
  #1  
plow0's Avatar
Thread Starter
Teching In
 
Joined: Jul 2012
Posts: 29
Likes: 0
From: Canada Ontario
Default 04 silverado shooting flames!!!

Hey guys. I got an 04 silverado. I posted a few weeks ago about my hassle I had with my longtubes. Problem is this time, I'm shooting 3 foot flames out of my exhaust!! The truck is un driveable because I can't even get over 20, it's bogging and popping like crazy! Noticed it last night on the highway and the flames were shooting into the other lane! It was unreal!
No idea what's causing it, has all new plugs wires o2cencors and longtubes. I'm fixing the truck and selling it, not buying another gm.
Reply
Old Apr 12, 2013 | 10:13 AM
  #2  
nonnieselman's Avatar
TECH Senior Member
iTrader: (10)
 
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Default

does it have a tune?

Cleaned the MAF?

Flames could come from a overly rich AFR, Do you have any exhaust leaks?
Reply
Old Apr 12, 2013 | 10:17 AM
  #3  
Mangled03gmc's Avatar
Baltimore Whore
20 Year Member
iTrader: (95)
 
Joined: Apr 2004
Posts: 16,820
Likes: 2
From: In a van DOWN BY THE RIVER
Default

Yeh, need to know more bout it, mods, tune ect. That isn't normal by no means.
Reply
Old Apr 12, 2013 | 10:30 AM
  #4  
plow0's Avatar
Thread Starter
Teching In
 
Joined: Jul 2012
Posts: 29
Likes: 0
From: Canada Ontario
Default

All the truck has for mods is longtube headers, cats, flowmaster 10 muffler. It was running fine then all of a sudden ran like ****. No tune or anything
Reply
Old Apr 12, 2013 | 10:42 AM
  #5  
nonnieselman's Avatar
TECH Senior Member
iTrader: (10)
 
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Default

Im thinking your cheap headers and bad shop is your cause of problems...

https://www.performancetrucks.net/fo...eaders-515150/




was it running good before you took it to that shop?
Reply
Old Apr 12, 2013 | 10:59 AM
  #6  
dirt track racer 81's Avatar
TECH Senior Member
iTrader: (45)
 
Joined: Jun 2005
Posts: 9,439
Likes: 13
From: Hennessey, Oklahoma
Default

Burnt wire on the header tube with the hump and unburned fuel and air being reburned in the exhaust..
Reply
Old Apr 12, 2013 | 11:25 AM
  #7  
nonnieselman's Avatar
TECH Senior Member
iTrader: (10)
 
Joined: Oct 2004
Posts: 14,068
Likes: 2
From: Crystal Springs, MS
Default

= flame thrower!!
Reply
Old Apr 12, 2013 | 11:37 AM
  #8  
plow0's Avatar
Thread Starter
Teching In
 
Joined: Jul 2012
Posts: 29
Likes: 0
From: Canada Ontario
Default

Truck wasn't running to good, reason I got the headers was because my cats were clogged and the ypipe with cats was 1000 bucks . Wires are well away from the headers. I ordered wires that you can bend solidly around each header bump. Driving home last night melted my plastics off my back bumper
Reply
Old Apr 12, 2013 | 12:00 PM
  #9  
kelsey_canard's Avatar
TECH Resident
iTrader: (5)
 
Joined: Nov 2010
Posts: 959
Likes: 1
From: Arkansas
Default

I fixed a truck that someone had installed the wrong o2 sensors in. In closed loop it was giving a -100 fuel trim. Needless to say, it drove like complete crap. Does it do fine when its cold/ in open loop?
Reply
Old Apr 12, 2013 | 12:04 PM
  #10  
plow0's Avatar
Thread Starter
Teching In
 
Joined: Jul 2012
Posts: 29
Likes: 0
From: Canada Ontario
Default

Runs like **** 24/7 but doesn't run as bad when I first drive it for 2 or 3 minutes
Reply



All times are GMT -5. The time now is 07:43 AM.