I am looking at updating some of my suspension componets. I have addco front and rear sway bars. My current bushings are toast and I am looking to upgrade to poly bushings that are greaseable. I found ones for the rear but i can't seem to find one for the front. The closest i have found is 1 7/16 that are greasable. Yall think those 1 7/16 ones will be OK?

 

???????

 

Couldn't you drill it up to 1 1/2?

 

The only thing i could find that was atleat 38mm was for the 97-?? vette but i couldnt find a pic of the mount..

Id just run the 7/16 ones...Do you run poly one's now??

 

Ya, i think i am just going to order the 1 7/16 ones... currently i am running stock bushings on the front which are pretty well wore out and crushed. I don't think running a stock sized bushing with a 1 1/2 sway bar was a good idea... in the back i am running the addco bushings that came with the bar, they look horrible...

 

What are you running up front stock or addco?

 

addco 1.5 up front and addco 1.00 out back

 

Geez guess i coulda looked at the 1st post lol

The problem i had on the tbss with the greaseable bushings was the bar moved around alot,but the way the truck bar i made iit shouldnt be a problem...

I may have that set your looking for at the house..Let me see if i got and you can have it for the shipping if you want...

 

Sorry bro, I did many searches for you and didn't find exactly what you are requesting...

There are some different bushing sets on Summit Racing, but I couldn't find any that specified 1.5"...also a couple different ones on Jegs...

Good luck!

 

cool let me know...

Yep i have looked everywhere...


on a side note: the addco bars are nice, but ALL the mounting hardware is crap... The front bar did not come with bushings so i had to reuse the stockers...


I think i am just gonna get the 1 7/16 ones for the front. On the rear i am going to completely redo all the mounting points, i am planning on welding solid mounting points to the axle and trash all the stupid ubolts...