Anyone here know where I could find a replacement NPT vacuum fitting for an Aeromotive regulator. It would be nice to have the nipple be 1/4" so I can run a 1/4" vacuum line from the regulator strait to the back of my FAST 102. I hate using the shitty plastic vacuum adaptors. Thanks guys

 

Is it a hose barb? If so, in the brass fitting section at the hardware store.

 

Are there brass fittings with a 1/16 npt thread?

 

It must be 1/8", isn't it?

 

Nominal OD for 1/6" NPT is 0.313", 1/8" NPT is .405", 1/4" is .540".

 

It is 1/16 NPT. That is the problem. Maybe I will just drill and tap 1/8" npt down the road.

 

I didn't even know there was 1/16" NPT before I looked up those figures.

 

McMaster has them.

 

Oops, wrong hose size. I am useless.

 

Hahaha no your not. Thanks for trying. I thought it was crazy that I couldn't find the fitting I was looking for but it looks like it isn't out there.