Whipple A2W intercooler is here!
11-06-2006, 06:42 PM
#42
Originally Posted by XLR8NSS
Why not just try it like it is before modifying it? 
Im not modifying anything.... lol, just trying to get an idea of the efficiency of this system from others who know a little more than me. Obviously the test will be when i get it together and running. Should have 40* ambient temps by then though...
.
11-06-2006, 06:55 PM
#43
11-07-2006, 12:27 PM
#45
Originally Posted by moregrip
any progress?
...took me about 15 minutes and i had the intercooler moved aside and the blower sitting on the work bench. Cleaned everything off around the manifold injector ports and should have the new rail installed Thursday when it gets here. What kind of grease do i need for the injector O-rings?
11-07-2006, 03:17 PM
#46
Originally Posted by Whippled 496
I yanked the blower and intercooler off and am ready to pull the rail and injectors out, just want to wait till i have the rail in my hand before i pull it off. Less chance of something falling down in there that way. Funny how quick everything disassembles after you have done it 2 or 3 or 109 times .... ...took me about 15 minutes and i had the intercooler moved aside and the blower sitting on the work bench. Cleaned everything off around the manifold injector ports and should have the new rail installed Thursday when it gets here. What kind of grease do i need for the injector O-rings?
...took me about 15 minutes and i had the intercooler moved aside and the blower sitting on the work bench. Cleaned everything off around the manifold injector ports and should have the new rail installed Thursday when it gets here. What kind of grease do i need for the injector O-rings?
if you get too much vasonline on your hands well you can figure out what to do with the rest....