Whipple A2W intercooler is here!
11-02-2006, 10:31 AM
#1
Whipple A2W intercooler is here!
Took delivery this morning. Components look nice and well made, beaded ends on the pipe and what not. The heat exchanger seems a little small though, but i am not familiar with what size they need to be to do their job efficiently. I will get some photo's this evening and get started on the install tomorrow.. 
11-02-2006, 07:21 PM
#6
okay gentleman, here are some pictures of the kit. I wont be using this overflow tank, I will be using a larger tank that mounts in the AUX battery location with a fuel cell cap. I also wont be using the fuel injectors that are mounted on that intake adapter, I will be capping them off like the one i have now. I will most likely be selling this overflow tank and extra injectors soon. Comments are welcome.....
Trending Topics
11-02-2006, 08:42 PM
#8
Originally Posted by moregrip
looks good!
some of those cooling fins are bent, go get two micro screw drivers and straighten them out
some of those cooling fins are bent, go get two micro screw drivers and straighten them out
Last edited by Whippled 496; 11-02-2006 at 10:39 PM.
11-02-2006, 09:14 PM
#9
Originally Posted by Whippled 496
lol, done and done. Does that xchanger look large enough to get the job done? I plan to mount it right behind the grill in front of the tranny cooler. Should get plenty of air there going down the road and from the clutch fan. I was going to upgrade that to a larher xchanger, but i figure i will get the system in and running first to see how it does. The intercooler core is larger than i thought it would be....about 10x16x3.
11-02-2006, 09:14 PM
#10
That actually looks like a pretty nice kit. From Whipple, I bet it cost a fortune. I bet that makes a world of difference not only in upper rpm power, but all around daily driving. I wish I could find a cheap solution like that for my whipple'd tahoe.