Im looking at putting a boost cam in my 6.0 im running a borg 76mm looking to run 10-12 psi motor is bone stock. if i could i would like something close to a 112 lsa if possible. any suggestions. will i see any big gains with a boost cam over the stock cam

 

I think there are a couple guys here running the Isky 212/212 and 218/218 on 112s in the 6.0s. If you arent wanting to go much higher boost wise then Id stick with the smaller cam.


Maybe Stock48 will chime in since he seems to be one of the turbo cam guru's here!

 

Will I see good gains over stock with the isky

 

Stock 48's specd 212-212 112 lsa is great in my truck.

 

Get one of the ISKY cams like mentioned or either a speed inc TU0 cam. Yes you will see some gains over stock of course.

 

should i go with the isky 112 or the 118 and where do i find one

 

Ill tell ya this much, Stock48 with a 76mm and 6.0 is running low 10s (IIRC) on the 212/212-112.

 

Thought he ran a 9.7x with it?

 

Yea I think he did but on a different motor maybe? Im not 100% positive either way haha.

 

No, he went 9.7 with the 76 and stock 6.0. There is a thread on it.