'09 ccsb 5.3 13.9@98
#1
Thread Starter
13 Second Truck Club
iTrader: (1)
Joined: Feb 2008
Posts: 1,333
Likes: 8
From: Sublette, KS
Ran my 2009 Silverado CCSB 2wd last Saturday @ KID in Wichita. DA was about 2000ft and about 10 mph headwind on my best pass.
Specs:
-Iron block 5.3 w/6L80e
-3.42 w/G80 rear
-JFR spec'd Isky baby cam (210/216 .532 lift 108 LSA)
-FTI 2600-2800 triple disc
-Pacesetter 1 3/4" LT's
-3" ORY w/cutout after
-Stock intake w/K&N
-Stock suspension
-5300# race weight
Best pass was a 13.9@98.7 with 2.02 60ft
VIDEO:
Watch "My 09 CCSB 13.9@98.7" on YouTube

Specs:
-Iron block 5.3 w/6L80e
-3.42 w/G80 rear
-JFR spec'd Isky baby cam (210/216 .532 lift 108 LSA)
-FTI 2600-2800 triple disc
-Pacesetter 1 3/4" LT's
-3" ORY w/cutout after
-Stock intake w/K&N
-Stock suspension
-5300# race weight
Best pass was a 13.9@98.7 with 2.02 60ft
VIDEO:
Watch "My 09 CCSB 13.9@98.7" on YouTube

Last edited by LS1FREEK; Mar 16, 2015 at 04:05 PM.
#5
Thread Starter
13 Second Truck Club
iTrader: (1)
Joined: Feb 2008
Posts: 1,333
Likes: 8
From: Sublette, KS
Thanks Stewart! The video is actually the pass my brother made. I ran another 13.9@98.8, i was letting the converter flash up. I brake stalled it to about 1200 then smashed it and let off the brake at the same time. My brother ran a 2.02 60ft in that video, I ran a 2.08 60ft. I don't think it made any difference on my truck, I think the only reason it 60ft harder in the video (.06 sec) was because he weighs 80# less than me haha. I mph better cause I was shifting it manually, at 6800 ish. He left it on drive shifting at 6200. I still can't believe this baby 210/216 cam from Jarret (AKA STOCK48) pulls clear to 7000!!
#6
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post







