Who have tuned this cam and made it work?

I got this cam on a 6.0 and im having prolems with it.
It idles good but when i accelerate fast and let go fast the gas it just drops around 300 to 500 rpms and then goes back to idle.

I've try to many things to make it work but nothing have help i even drill a hole and nothing. I have add air through the cracker and throttle follower and raise the RAF table a big amount of airflow but nothing got to work. When it drops to 300 rpms timing stays at 24. It only makes this problem in gear on park and nuetral its fine.

Can someone help me out or have a file that i can take a look at so can fix this problem?

 

What year vehicle? Intake? Throttle size?

 

EFI live or HPT? Can you upload a tune file and log?

 

+1, we need more info on your setup. Cable or DBW throttle body?

 

Sorry for that i was in a hurry.

Its a 01 6.0 full bolt ons, cam, 3600 converter, got a 80mm throttle body.
Tuning with Hptuners.

I dont have a log of it i will try and get it but heres the file.

 

Log IAC position in park and then in gear and re-create that RPM drop you were talking about. Then post up the log.

 

Ok heres one on drive that i did when i raise the RAF table since i was tired and frustrated.

 

The tune file is locked.

 

Locked? WTH ok let me see.

 

Therei repost it see if it work.