Tuning, Diagnostics, Electronics, and Wiring HP Tuners | EFILive | Hand Held Programmers | Stand Alone PCM's | Electronics | Wiring Diagrams

NBS 07 tuning

Thread Tools
 
Search this Thread
 
Old Apr 22, 2007 | 12:19 AM
  #1  
graysilverado5.3's Avatar
Thread Starter
Launching!
iTrader: (4)
 
Joined: Aug 2006
Posts: 262
Likes: 0
From: Texas
Default NBS 07 tuning

My friend has a NBS 07 sierra.Yesterday we played some races and on one of the races like from a 25-30 punch the truck didn't move even through my friend floored it. It took about 1 second before the truck started to move. Has this happened to someone before? Could it be the tune?
Reply
Old Apr 22, 2007 | 12:24 AM
  #2  
ridnlow's Avatar
TECH Fanatic
iTrader: (5)
 
Joined: Sep 2003
Posts: 1,074
Likes: 0
From: Mobile, AL
Default

its all in the tune.. it has a delay before it will allow it to go full throttle..
Reply
Old Apr 22, 2007 | 12:48 AM
  #3  
graysilverado5.3's Avatar
Thread Starter
Launching!
iTrader: (4)
 
Joined: Aug 2006
Posts: 262
Likes: 0
From: Texas
Default

So then my friend should take it back the tuner to fix that? It was pretty bad him flooring it and nothing happening
Reply
Old Apr 22, 2007 | 08:17 AM
  #4  
Rhino79's Avatar
9 Second Club
iTrader: (7)
 
Joined: May 2005
Posts: 3,127
Likes: 1
From: Cabot, AR
Default

Have the tuner check the PE delay, if not 0 then set it to 0.
Reply
Old Apr 22, 2007 | 11:29 AM
  #5  
graysilverado5.3's Avatar
Thread Starter
Launching!
iTrader: (4)
 
Joined: Aug 2006
Posts: 262
Likes: 0
From: Texas
Default

thanks for the help
Reply
Old Apr 22, 2007 | 03:11 PM
  #6  
gmforlife's Avatar
TECH Regular
iTrader: (2)
 
Joined: May 2006
Posts: 439
Likes: 0
From: CA
Default

Originally Posted by Rhino79
Have the tuner check the PE delay, if not 0 then set it to 0.
Exactly right, you set it to 0 so the it goes into PE immediately, 0 delay.
Reply
Old Apr 22, 2007 | 08:13 PM
  #7  
BigRed53's Avatar
On The Tree
 
Joined: Oct 2005
Posts: 150
Likes: 0
From: kilgore tx
Default

i have a 07 nbs, i know i havent updated my sig, but anyways, it has the fuel delay,

also i know that when i mash the throttle, the throttlebody does not snap open, but rather slowly comes to full open position, kind of weird, charlie wheatley did the live tune down in houston, and told me that its something with the new tac.
Reply
Old Apr 22, 2007 | 09:00 PM
  #8  
Wheatley's Avatar
Truck Sponsor
iTrader: (12)
 
Joined: Apr 2003
Posts: 3,286
Likes: 2
From: Sealy/Katy TX
Default

There is a long PE delay but the rate that the butterfly opens is in the TAC module
the throttle blade will full open but when you mash your foot to the floor,the blade slowly opens.An annoying thing for sure IMO
Reply
Old Apr 22, 2007 | 09:21 PM
  #9  
Rhino79's Avatar
9 Second Club
iTrader: (7)
 
Joined: May 2005
Posts: 3,127
Likes: 1
From: Cabot, AR
Default

My 05 Trailblazer is the same way.
Reply
Old Apr 22, 2007 | 09:29 PM
  #10  
Wheatley's Avatar
Truck Sponsor
iTrader: (12)
 
Joined: Apr 2003
Posts: 3,286
Likes: 2
From: Sealy/Katy TX
Default

yeah,sucks huh?LOL
Reply



All times are GMT -5. The time now is 02:17 PM.