Ok guys, to start things off, I'm not exactly in the market for injectors at the moment, I'm not looking to replace my current injectors due to a complaint or problem, and I'm not in the market of giving out specs freely, for a good reason; HOWEVER, I'm very curious if any of you have any experience with Injector Dynamics.? This might be a bit of a boring topic, and I don't expect a lot of response, but I am considering making a purchase if the response is positive and if the response also includes usable information for precise and consistent tuning capability that may be tied in with the injectors themselves. I've heard a few individuals speak highly of Injector Dynamics's products, but do any of you have your own personal opinion on them?


As always, thanks in advance for any advice that's actually helpful and experience-related.

 

ID1000, wow! - HP Tuners Bulletin Board

 

HP Tuners Bulletin Board - View Single Post - Injector Dynamics prices are going up

 

I think swerve7200rpm has them

 

i ran the id1k's in my old cobalt ss. never had an injector run so smooth or have great manners in being controlled by the **** o/s system on the cobalts.

worked with paul yaw on getting the tables right and getting them to seal right for the cobalt stuff. if i had a need for them in the truck, or anything else i build. i would drop the cash in a heartbeat for them.

 

That's definitely along the lines of what I'm looking for. Thanks guys for the information, and I've been reading up on the HpTuners board about them more and more. Definitely going to purchase once decided on what's best. Maybe Swerve will chime in with his opinions also.

 

I have the ID1000's and they run as good as the original stock injectors and green top 42's, plus beat other options I have tried which included drilled Bosch 65's, Siemens 80's, and Siemens 60's. The only con I have found is the price but if you figure in how much your time is worth on the side of the road or a dyno, they are a bargain!

 

I am running these as well. I primarily went with them because they come with full and correct tuning data which definitely adds value to the product.

 

i run them as well....i will never have to buy another injector

 

I really appreciate the input, guys. Whenever I get some time, I'm going to get the right set and give it a go at getting them dialed in.