2002 RCSB, 370, lots of parts must go.
#1
2002 RCSB, 370, lots of parts must go.
Well I picked this truck up a little while back. Had a 5.3 with a cam, 4l60 with trans kit, and servo, Nissan wheels, and Tan interior lowered 4-6 maybe. its pretty low..
This was gonna be our race truck, so we purchased only good parts. The build was gonna be a twin turbo.
Only thing needed to start and drive this truck.
intake, tune, install headers, and bolt the convertor bolts up. It is very close to completion and I hate to sale it..
12000.00
--
swapped interior to an EXcab, smoked with center console.
Denali cluster
---------
Build a 370, Built for HI levels of boost
H-beam rods,
9-1 compression, Diamond
L92 Heads,
Bullet cam,
I 284 E 280
601 601 lift
I 230 E 226 @.050
Lobe sep. 115 installed at 111
manely valves, springs retainers
ARp head studs, and Main studs,
The head studs are oversized.
HV oil pump
Cometic head gaskets
102mm throttle body,
96 lbs. low Imp. injectors with driver installed
no intake.
-----
trans
4L80E
Billet input, intermid shafts
Trans go HD2 D shift kit
all new steels
34 element sprag
high energy bands,
This tranny was completely gone through and all new electronics.
Built for HI horsepower.
Crossover and driveshaft done already.
------
Convertor
TCS Billet 2800 stall
------
Innorvators West 8 Rib Pulley set
-----
Cowl Hood
Those parts are already installed on the truck.
List of parts that go with the sale of the truck
Aeromotive A1000 and filter
1 7/8 Coated headers
Trick electric fans & a set of LS car fans
Caltracs
original engine and trans
3 guage cluster for Apillar
and any other misc parts I have here for the build ....
Tires are New with lots of tread on them..
This was gonna be our race truck, so we purchased only good parts. The build was gonna be a twin turbo.
Only thing needed to start and drive this truck.
intake, tune, install headers, and bolt the convertor bolts up. It is very close to completion and I hate to sale it..
12000.00
--
swapped interior to an EXcab, smoked with center console.
Denali cluster
---------
Build a 370, Built for HI levels of boost
H-beam rods,
9-1 compression, Diamond
L92 Heads,
Bullet cam,
I 284 E 280
601 601 lift
I 230 E 226 @.050
Lobe sep. 115 installed at 111
manely valves, springs retainers
ARp head studs, and Main studs,
The head studs are oversized.
HV oil pump
Cometic head gaskets
102mm throttle body,
96 lbs. low Imp. injectors with driver installed
no intake.
-----
trans
4L80E
Billet input, intermid shafts
Trans go HD2 D shift kit
all new steels
34 element sprag
high energy bands,
This tranny was completely gone through and all new electronics.
Built for HI horsepower.
Crossover and driveshaft done already.
------
Convertor
TCS Billet 2800 stall
------
Innorvators West 8 Rib Pulley set
-----
Cowl Hood
Those parts are already installed on the truck.
List of parts that go with the sale of the truck
Aeromotive A1000 and filter
1 7/8 Coated headers
Trick electric fans & a set of LS car fans
Caltracs
original engine and trans
3 guage cluster for Apillar
and any other misc parts I have here for the build ....
Tires are New with lots of tread on them..
#3
We don't do tuning here so it would need tuning for running.
Stage 4 kit I can sale with the purchase ofbthe truck fir 3000.00.
We can install your intake And the turbo kit at no extra charge.
We found some parts last night that go with the truck. Sterio stuff, another hood, several nitrous bottles.
Stage 4 kit I can sale with the purchase ofbthe truck fir 3000.00.
We can install your intake And the turbo kit at no extra charge.
We found some parts last night that go with the truck. Sterio stuff, another hood, several nitrous bottles.