THE TRUCK STOP General Chat area. Religion and politics topics will undoubtedly be deleted. Anything over PG-13 is not allowed. WORK SAFE!

New G-Tech times

Thread Tools
 
Search this Thread
 
Old Feb 4, 2006 | 12:51 AM
  #1  
TravisH's Avatar
Thread Starter
TECH Fanatic
iTrader: (1)
 
Joined: Aug 2005
Posts: 1,363
Likes: 0
From: Mukilteo, WA
Default New G-Tech times

They are in the sig....

I gained .23 in my 60', and nearly .5 in my 1/8th with the new tranny and stall! And this was in full street trim with the 20's and all.
Reply
Old Feb 4, 2006 | 01:23 AM
  #2  
1slow01Z71's Avatar
Tin Foil Hat Wearin' Fool
iTrader: (36)
 
Joined: Oct 2004
Posts: 23,204
Likes: 4
From: Austin, TX
Default

I have a feeling you may be dissapointed with the time you actually run at the track. I ran a 9 flat with 3K stall, true duals with cutouts, CAI, Nelson tune and 100 shot of nitrous with stock tires and some weight reduction in 50* weather. That was pulling a 1.9 60ft. I hope you run the times that the G-Tech says but it has been my experience they arent that accurate. It told me I ran a 13.8 in the 1/4 with my 418 but yet I can beat a intake exhaust tune SS camaro Maybe I jsut dont know how to set it up right Get it to the track
Reply
Old Feb 4, 2006 | 10:19 AM
  #3  
TECH Fanatic
 
Joined: May 2004
Posts: 1,125
Likes: 0
From: Lincoln, NE
Default

gtech times and actual times never match. parish has his down to a science. he knows how much he needs to add to his gtech's to be close to his actual times.
Reply
Old Feb 4, 2006 | 11:20 AM
  #4  
TravisH's Avatar
Thread Starter
TECH Fanatic
iTrader: (1)
 
Joined: Aug 2005
Posts: 1,363
Likes: 0
From: Mukilteo, WA
Default

Ya I havent gotten a chance to compare it with track times yet but I'm goin on Feb 12 weather permitting....

My 60' probly could have been better, but it was wet and my truck has no wieght reduction whatso ever...

The g-tech is good gor showing that my mods actually did something! like I said I gained .2 60' , .4 in the 330' and actually like .4 in the 1/8 and it was wet out so the front broke loose pretty bad.
Reply
Old Feb 4, 2006 | 11:55 AM
  #5  
TXsilverado's Avatar
Moderator
20 Year Member
Loved
Liked
Community Favorite
iTrader: (19)
 
Joined: Jan 2005
Posts: 18,364
Likes: 291
From: Humble Texas
Default

my g-tech is almost a full second slower than my actual times. i just use it to see if a mod actually did anything.
Reply
Old Feb 5, 2006 | 01:01 AM
  #6  
TravisH's Avatar
Thread Starter
TECH Fanatic
iTrader: (1)
 
Joined: Aug 2005
Posts: 1,363
Likes: 0
From: Mukilteo, WA
Default

i know mine isnt that far off, compared to a timeslip at the track, it is only about .3 off and the g-teck time was at about 60 degrees an the track was about 90 degrees...so I know it is close!
Reply
Old Feb 5, 2006 | 01:20 AM
  #7  
Tan327's Avatar
TECH Fanatic
iTrader: (15)
 
Joined: Nov 2005
Posts: 1,754
Likes: 0
From: Arkansas/Germany
Default

Nice times man, I always heard G-Tech times weren't too far off but they may be. How do you like the Dacco stall, I'm thinking about going with one, does it at least hit 2800?
Reply
Old Feb 5, 2006 | 07:51 AM
  #8  
JimS's Avatar
TECH Fanatic
 
Joined: Jul 2005
Posts: 1,396
Likes: 0
From: Galesburg Il
Default

.3 sec off is huge. There is an adjustment on the G Tech that can be made to better reflect reality.
Reply
Old Feb 5, 2006 | 05:43 PM
  #9  
203Cree's Avatar
TECH Addict
 
Joined: Jul 2005
Posts: 2,515
Likes: 0
From: Olathe, KS
Default

Most of the ones I've seen were always within a tenth or two at the track. MPH has always been screwy tho.
Reply
Old Feb 7, 2006 | 11:06 PM
  #10  
TravisH's Avatar
Thread Starter
TECH Fanatic
iTrader: (1)
 
Joined: Aug 2005
Posts: 1,363
Likes: 0
From: Mukilteo, WA
Default

There is an adjustment on the G Tech that can be made to better reflect reality.
I do have it adusted

The difference was mostly in the fact that it was about 30* cooler when I ran my g-tech time, and I had my cats gutted. (I was .3 faster)
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
thunder550
Trucks and SUV Classifieds
9
Oct 8, 2015 04:53 PM
kr1s
Tuning, Diagnostics, Electronics, and Wiring
9
Aug 24, 2015 05:34 PM
smokeshow
Tuning, Diagnostics, Electronics, and Wiring
2
Aug 23, 2015 08:23 PM
therock
Tuning, Diagnostics, Electronics, and Wiring
0
Aug 23, 2015 01:37 PM




All times are GMT -5. The time now is 03:21 AM.