I'm taking my spindles off and I need the stock spindles and rear blocks for a 2003+ 2wd silverado. I'm also wanting the control arms as well.

Here's my problem. To make a long story short, I was in two accidents back in October, and ever since then my truck pulls to the left. The dealership swears its the spindles and not the rest of the stock suspension (they say they cannot bring the caster into specs). I'm wanting to bring my truck down to stock height to see if the pull is eliminated.

I've posted in the wanted section, but I'm also posting this here because I figure I'd more of an audience

Thanks!

 

your frame might be bent some.

 

Well I have the spindles but no control arms

 

according to the the little alignment machine, it isn't...

 

i dont think the stock 2wds come with blocks in em, only the 4wds do, you should just need the stock ubolts

 

I have the U bolts as well if you need them.

 

I have stock spindles for a 2003 Avalanche but they might be expensive to ship to TX.