STEREO & ELECTRONICS Audio Components | Radars | Alarms | General Wiring

3 subs, which amp?

Old Sep 9, 2008 | 07:08 PM
  #1  
lo&sloSierra's Avatar
Thread Starter
TECH Enthusiast
iTrader: (8)
 
Joined: Jun 2008
Posts: 582
Likes: 0
From: Alabama
Default 3 subs, which amp?

will a kicker zx750.1 run 3 comp 10's fine? or is there another amp i should use?
Reply
Old Sep 9, 2008 | 09:21 PM
  #2  
SeegsRST's Avatar
On The Tree
 
Joined: Mar 2007
Posts: 110
Likes: 0
From: Tulsa, OK
Default

u should buy my kx1200.1 it would power those alot better
Reply
Old Sep 10, 2008 | 06:45 PM
  #3  
53bowtie's Avatar
TECH Fanatic
iTrader: (6)
 
Joined: Mar 2007
Posts: 1,614
Likes: 14
From: Detroit, MI
Default

the black cone with yellow stitching comps will be just fine on that amp. They are only 150w rms if i remember right. Just remember, with 3 it is going to be a wierd ohm load at the amp so it will not do the same power as it is rated for at 4 and 2 ohm.
Reply
Old Sep 11, 2008 | 12:34 PM
  #4  
blueflamed03's Avatar
TECH Enthusiast
iTrader: (1)
 
Joined: Jul 2008
Posts: 647
Likes: 1
From: Oklahoma
Default

if you run it at 2 ohm perfect, KX12001 is too much for three Comps.
Reply
Old Sep 11, 2008 | 01:20 PM
  #5  
larsy87's Avatar
apple bottom jeans
 
Joined: Dec 2006
Posts: 1,312
Likes: 0
From: Lucan, Ontario
Default

Whats the ohms on those subs?
Reply
Old Sep 11, 2008 | 01:38 PM
  #6  
valleyperformance's Avatar
Teching In
 
Joined: May 2007
Posts: 16
Likes: 0
Default

i have 3 JLaudio w3's wired to 1ohm with a db drive platinum series 900x1 and couldn't be happier with the sound
Reply
Old Sep 11, 2008 | 05:35 PM
  #7  
53bowtie's Avatar
TECH Fanatic
iTrader: (6)
 
Joined: Mar 2007
Posts: 1,614
Likes: 14
From: Detroit, MI
Default

Originally Posted by blueflamed03
if you run it at 2 ohm perfect, KX12001 is too much for three Comps.
He could run 2 ohm if they are single 4 ohm subs. That would give him 1.34 ohms which would be closer to 2 ohms after rise.

Last edited by 53bowtie; Sep 11, 2008 at 05:42 PM.
Reply
Old Sep 11, 2008 | 06:08 PM
  #8  
blueflamed03's Avatar
TECH Enthusiast
iTrader: (1)
 
Joined: Jul 2008
Posts: 647
Likes: 1
From: Oklahoma
Default

true, 1.34 or 2.66, depening on coil config.
Reply
Old Sep 11, 2008 | 10:48 PM
  #9  
53bowtie's Avatar
TECH Fanatic
iTrader: (6)
 
Joined: Mar 2007
Posts: 1,614
Likes: 14
From: Detroit, MI
Default

course if he rant the kx1200.1 at 3 ohms (2.66) instead of 2 it wouldnt be as bad if you are carefull with the gains.
Reply
Old Sep 12, 2008 | 08:47 AM
  #10  
blueflamed03's Avatar
TECH Enthusiast
iTrader: (1)
 
Joined: Jul 2008
Posts: 647
Likes: 1
From: Oklahoma
Default

KX12001 does max power at 1 ohm tho, not 2.
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:16 PM.