Finally got this 418 dialed in.
Ran a couple lousy 11's with wheel hop then bad wheel spin and up in smoke.
17 psi hot in the Hoosiers was the magic number Friday.
Ran a 10.965, a 10.935, and a best of 10.904 @ 123+ mph on a new best sixty of 1.52


Poor vid of one run

[IMG]https://cimg5.ibsrv.net/gimg/www.performancetrucks.net-

From STEVEN @ RACING VIDS
https://www.youtube.com/watch?v=zXgQ...ature=youtu.be

10.90 Run
10.93 Run
vbulletin/2000x1124/80-silverado_mir_2017_10_904_et_6e518b27074d499c6d15e c30f98c740d8f036b56.jpg[/IMG]

Pitt

 

That's awesome congrats- I can't even get that with forced induction lol

 

awesome!!

 

Thanks guys.

 

Congrats. Nice runs

 

Thanks...I am not quite done yet.
Shift points were 7200 and 6700 on the 2-3 shift. I need to back off to maybe 7k or maybe even 7100 rpm, then up my 2-3 to the same.

My shift drops were way up in the 5300 rpm range. Crazy compared to what I am used to with the 402...shifting at 6050 rpm and dropping to 4800.

I need to hit a good air day and do it again.

Suspension is pretty much done. Slow-moe on vid shows perfect wheel spin on launch. I would need more power to get lower. I was at 501 rwhp and then dropped compression from 13.2 to 12.1 so I know I am south of 500 rwhp. This time I had every thing in full street trim except tires. Full interior, bumpers, tail gate, and exhaust.

 

Congrats!

 

Thx man

 

So when does the 150shot go on and shoot for 9's..?
With that new low compression its perfect for it right? Lol

 

Yeah, perfect, lol
Not decided on NOS yet.